Refill Messages; Brightness; Contrast; Filter Check - Miele ProfiLine PG 8083 Operating Instructions Manual

Settings
The refill messages can be turned
off without first refilling to let the
dishwasher go into Standby mode.
But the fault messages cannot be
turned off.

Refill messages

If you want the dishwasher to switch to
Standby mode in spite of a refill
message, you can switch both indicator
lights off together.
^ Select the desired setting and press
the center button to confirm.

Brightness

There are seven different brightness
levels for the display.
^ Select the desired brightness and
press the center button to confirm.

Contrast

There are seven different contrast
levels for the display.
^ Select the desired contrast and press
the center button to confirm.
52

Filter check

You can set the length of the interval
between filter checks as a reminder.
You can set an interval between 30 and
60 wash cycles.
The factory setting is an interval of 50
wash cycles.
You can also deactivate this function.
^ Select the desired setting and press
the center button to confirm.

External DOS

Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module DOS
G 60 Semi.
The DOS module G 60 comes with a
separate installation manual.
^ Select the desired setting and press
the center button to confirm.
The setting will remain active until
you deactivate External DOS.