Turning the dishwasher on
^ Open the water supply if it is closed.
^ Open the door.
^ Make sure the spray arms can rotate
^ Press the - button to turn the
The factory-set ECO program will
appear in the display and the matching
indicator light will come on.
After a short while, the estimated time
for the selected program will appear in
You can also change the setting to the
program you last used (see "Settings -
Selecting a program
Choose the program according to the
type of dishware and soiling.
See the Program guide for a
description of the programs and their
^ Use the X button to select the
The indicator light for the selected
program comes on.
When the indicator light next to 4
lights up, you can select additional
programs using the 4 ü button.
You can now select additional
options (see Additional options).
Starting a program
^ Close the door to start the program.
The optical interface lights up to
confirm the start of a program
If additional functions are selected, the
corresponding indicator lights will also
Cancel a program only in the first
Otherwise important program steps
(e.g. water softening) may be