1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dishwasher
  5. PG 8080i
  6. Operating instructions manual

Miele PG 8080i Operating Instructions Manual

Commercial dishwasher
Hide thumbs Also See for PG 8080i:
Table of Contents

Advertisement

Quick Links

Download this manual

Operating Instructions

Commercial Dishwasher
PG 8080i
en - US
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 09 501 390

Advertisement

Table of Contents
loading

Related Manuals for Miele PG 8080i

Summary of Contents for Miele PG 8080i

  • Page 1: Operating Instructions

    Operating Instructions Commercial Dishwasher PG 8080i en - US To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 09 501 390...

  • Page 3: Table Of Contents

    Contents Guide to the manual ..........6 IMPORTANT SAFETY INSTRUCTIONS.
  • Page 4 Contents Adding detergent..........35 Turning the dishwasher on .
  • Page 5 The Miele waterproof system ........

  • Page 6: Guide To The Manual

    Guide to the manual Warnings and notes Warnings Warnings marked like this contain safety information concerning potential injury and damage. Read the warnings carefully and follow the instructions and directions. Notes Notes contain information that is particularly important to follow. Additional information and comments Additional information and comments are contained in a simple frame.

  • Page 7: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING - Intended use When using your dishwasher This dishwasher has short runtimes follow basic precautions, with heavy duty cleaning power and is including the following: intended for use in offices, lunch rooms, clubhouses, workshops, large kitchens and similar commercial This dishwasher is intended for environments.
  • Page 8 A damaged machine is cabinetry. dangerous. Unplug the machine and In order to reduce the risk of call your Miele dealer or the Miele damage from condensation, the Technical Service Department. furniture in the area around the The appliance should only be...
  • Page 9 If the power cord is damaged it must only be replaced by a qualified Service technician with a genuine Miele power cord. Do not install this dishwasher beneath a cooking surface, oven or any appliance that radiates heat.
  • Page 10 IMPORTANT SAFETY INSTRUCTIONS Proper use Under certain conditions, hydrogen gas may be produced in a hot water The dishwasher is designed only for system that has not been used for two operation with water and the weeks or more. HYDROGEN GAS IS appropriate cleaning agents.

  • Page 11: Save These Instructions

    Avoid inhaling detergent. If swallowed, it can cause burning in the Only specific additional equipment, mouth and throat or inhibit breathing. made by Miele or approved by Miele, Observe the detergent should be used with this machine. manufacturer's directions for storage, Consult Miele on the type and use and dosage of cleaning agents.

  • Page 12: Guide To The Commercial Dishwasher

    Guide to the commercial dishwasher Overview a Upper spray arm (not visible) g Data plate b Upper basket h Child safety feature in the door handle (not visible) c Middle spray arm i Rinse aid reservoir d Air inlet for drying j Dual-compartment detergent e Lower spray arm dispenser...

  • Page 13: Control Panel

    Guide to the commercial dishwasher Control panel a Program selection e Delay Start button with indicator light b Display f Extra Drying button c Start/Stop button with indicator light with indicator light d 4 ü button, (other programs) g Program button for program with indicator light selection h - button (On/Off)

  • Page 14: Help To Protect The Environment

    Help to protect the environment Disposal of the packing Disposal of an old machine material Old appliances may contain materials that can be recycled. Please contact The cardboard box and packaging your local recycling authority about the protect the appliance during shipping. possibility of recycling these materials.

  • Page 15: Energy Saving Washing

    Help to protect the environment Energy saving washing This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips: ^ You may connect the commercial dishwasher to a hot water line. This is particularly suitable with energy-saving water heating sources such as solar energy systems.

  • Page 16: Before Using For The First Time

    Before using for the first time Opening the door Closing the door ^ Push the baskets in. ^ Push the door until it clicks shut. Keep your fingers off the door frame. You may crush your fingers. Child safety lock To prevent children from opening the dishwasher door during operation, use the child safety lock to lock the door.

  • Page 17: Display

    Before using for the first time Display General The following functions can be selected or set with the display: – the wash program – the Delay start time – the settings Settings menu The Settings menu allows you to set the The following appears in the display dishwasher to suit your requirements.

  • Page 18: Basic Settings

    Before using for the first time Basic settings It is useful to know your water hardness so that you can provide the service ^ Press the - button to turn the technician with this information in the dishwasher on. event of any service calls. If the dishwasher is being turned on for Please note your water hardness below: the first time, the welcome screen will...

  • Page 19: Filling The Salt Container

    Before using for the first time Every dishwasher is tested before If the hardness of your water is leaving the factory. Any water always below 4 °d (4 gr/gal), you do remaining in the machine is from the not need any salt. final factory test and does not However, you must still program indicate that the machine has been...
  • Page 20 Before using for the first time ^ Only open the door half way when Do not fill water into the salt adding salt to avoid spilling it. reservoir! ^ Press the button on the top of the salt reservoir in the direction of the arrow. ^ Only add just enough salt to fill the The cover will pop open.

  • Page 21: Refill Salt Indicator

    Before using for the first time Refill salt indicator ^ Refill the salt reservoir as soon as the Refill salt message is displayed. ^ Press the center button to confirm. The Refill salt indicator goes out. If a sufficiently high concentration of salt has not yet formed, Refill salt may continue to be displayed after adding the salt.

  • Page 22: Rinse Aid

    Before using for the first time Rinse aid Rinse aid helps to prevent spotting on dishes and glassware and speeds up the drying process. The rinse aid is filled into the reservoir and the set amount will be automatically dispensed. Use rinse aid only.

  • Page 23: Loading The Dishwasher

    Loading the dishwasher Tips: – Concave items such as mugs or bowls should be placed at an angle Remove coarse food residues from the so that the water can run off. dishware. – Ensure that the spray arms are not There is no need to rinse items before blocked by items that are too tall or loading into the dishwasher.

  • Page 24: Items Not Recommended For Dishwashing

    Loading the dishwasher Items not recommended for We recommend: dishwashing: – When purchasing dishes and cutlery, make sure they are dishwasher-safe. – Wooden cutlery and dishes or items with wooden parts: they discolor and – Drinking glasses may become fade. In addition, the glue used in cloudy over time.

  • Page 25: Typical Load For 10 Place Settings With Cutlery Basket

    Loading the dishwasher Typical load for 10 place settings with cutlery basket Upper basket Lower basket Cutlery basket...

  • Page 26: Typical Load For 13 Place Settings With Cutlery Basket

    Loading the dishwasher Typical load for 13 place settings with cutlery basket Upper basket Lower basket Cutlery basket...

  • Page 27: Upper Basket

    Loading the dishwasher Upper basket Foldable spikes The rows of spikes can be folded down For safety reasons use the to make more room for larger items dishwasher with both the upper and such as flat pans. lower baskets inserted. ^ Press the yellow lever down a and fold the spikes down b.

  • Page 28: Jumbo Cup Rack

    Loading the dishwasher Jumbo cup rack Universal support bar The cup rack can be set to two different The support bar will hold tall glasses widths so that it can also accommodate and stemware securely. large cups. ^ Fold the support bar down and lean the glasses against it.

  • Page 29: Adjusting The Upper Basket

    Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. items in the lower or upper basket, the upper basket can be adjusted to three Dishwasher with a cutlery basket levels of about 2 cm height difference between each level.

  • Page 30: Lower Basket

    Loading the dishwasher Lower basket ^ Place larger and heavier items such as plates, serving platters, saucepans, bowls, etc. in the lower basket. It can also be used for glasses, cups, small plates and saucers. Commercial dishwasher with cutlery basket ^ Place very large plates in the center of the lower basket.

  • Page 31: Glass Rack

    Loading the dishwasher Glass rack Foldable spikes ^ The glass rack can be folded up to The spikes at the front are used for make more room for tall items. plates, soup bowls, platters, desert bowls, and saucers. ^ Stemware, e.g. wine, champagne and beer glasses, can be leaned Both rows of spikes can be folded against the glass rack or suspended...

  • Page 32: Cutlery

    Loading the dishwasher Cutlery Cutlery basket ^ Fit the holder onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. ^ To avoid risk of injury, knives and forks should be placed with the handles facing up in the basket.

  • Page 33: Optional Accessories

    ...wash long-stemmed glassware ... a glassware rack for the lower basket. MieleCare Collection Miele branded cleaning and care products, including dishwasher salt, detergent and rinse aid, are available to order from your Miele dealer, Miele or the on-line Miele store www.mieleusa.com...

  • Page 34: Use

    Detergent Powder detergents Avoid inhaling powder Use only powder detergent in the detergents. Avoid swallowing dispenser in the door. dishwasher detergent! Detergents ^ Pour powder detergent into the can cause chemical burns to nose, compartments of the detergent mouth and throat. Consult a doctor dispenser.

  • Page 35: Adding Detergent

    Adding detergent Detergent dosing aid Compartment I holds a maximum of 2 teaspoons (10 ml), compartment II holds a maximum of 3.5 tablespoons (50 ml) of detergent. The horizontal marks in compartment II indicate the levels of approximately 1 ¼ and 2 tablespoons (20 and 30 ml) respectively.

  • Page 36: Turning The Dishwasher On

    When the indicator light next to 4 Turning the dishwasher on lights up, you can select additional ^ Open the water supply if it is closed. programs using the 4 ü button. ^ Make sure the spray arms can rotate The display alternates between the freely.

  • Page 37: Time Display

    Time display Standby Before the program starts, the time A few minutes after the last button is display shows the runtime of the pressed or a few minutes after the end selected program in hours and minutes. of the program the dishwasher will The remaining runtime is displayed switch to Standby mode to save during the program.

  • Page 38: End Of Program

    End of program Turning the dishwasher off The program has finished when At the end of a program: AutoOpen appears in the display ^ Press the - button to turn the and the door is slightly ajar (depending dishwasher off. on the model).

  • Page 39: Interrupting A Program

    Interrupting a program Changing a program A program will be interrupted as soon If the detergent dispenser cover has as the door is opened. already opened, powder detergent When the door is closed again, the must be added for the new program program will continue from where it was unless liquid detergent is being interrupted.

  • Page 40: Program Guide

    Program guide Program Application Detergent Follow the detergent manufacturer's instructions Compartment I Compartment II For fresh, non-sticky food residues ProSpeed 1 oz For normal, slightly dried food residues Universal 1 oz For burned-on, very adherent, very dry, Pots & Pans starchy or albuminous food residues.
  • Page 41 X = part of the program (X) = additional, optional program steps Interim rinse II, must be programmed by a Miele service technician. Optional temperature increase to 167°F (75°C). No AutoOpen at the program end because of the short program runtime.
  • Page 42 Program guide Program Application Detergent Follow the detergent manufacturer's instructions Compartment I Compartment II Special program without rinse aid, Glass no recommended for beer glasses. rinse aid (The glasses do not dry through their own 1 oz (beer heat after the program has ended and glasses) might have to be dried by hand).
  • Page 43 X = part of the program (X) = additional, optional program steps Interim rinse II, must be programmed by a Miele service technician. Optional temperature increase to 167°F (75°C). No AutoOpen at the program end because of the short program runtime.

  • Page 44: Additional Options

    Additional options Extra drying Delay start For better drying results and to reduce The start time of a program can be the amount of steam that escapes when delayed from 30 minutes to 24 hours. the door is opened, the Extra drying The delay is set in 30 minute function extends the fan runtime at the increments.
  • Page 45 Additional options ^ Press the "Start/Stop" button. Starting a program before Delay start has elapsed: The "Start/Stop" indicator light comes A program can be started before the Delay start time has elapsed. Just do If you don't press "Start/Stop" within a the following: few seconds after you have set the ^ Press the "Start/Stop"...

  • Page 46: Settings

    Settings Settings menu for changing Language standard settings The display can be set to different languages. Opening the Settings menu The displayed language can be ^ If the dishwasher is on, press the - Language changed in the submenu. button to turn it off. ^ Select the desired language and ^ Press and hold the "Start/Stop"...

  • Page 47: Water Hardness

    Settings Water hardness °d gr/gal Setting in display Your dishwasher comes with with a water softener. You must set the system to the water hardness level of your water supply. – The dishwasher must be programmed to exactly match the hardness of your water.

  • Page 48: Rinse Aid

    Settings Rinse aid AutoOpen For best results the rinse aid dosage To improve drying, the door can be adjusted. automatically opens a little at the end of The dosage can be set between 0-6 ml. a program, except for Pre-rinse, Short The factory setting is 3 ml of rinse aid.

  • Page 49: Optimize Standby

    Settings Optimize Standby A few minutes after the last button is pressed or a few minutes after the end of the program the dishwasher will switch to Standby mode to save energy. The display and the indicator lights are switched off and only the Start/Stop indicator light flashes slowly.

  • Page 50: Refill Messages

    Brightness optional external dosing module. There are seven different brightness Please check with Miele Technical levels for the display. Service if a suitable external dosing ^ Select the desired brightness and module is available for your voltage press the center button to confirm.

  • Page 51: Detergent Dosage

    Settings Detergent dosage Venting the DOS system The DOS system will not dispense This function becomes visible when reliably if there is air in the system. External DOS is activated. The DOS system must be vented You can set the detergent dosage in –...

  • Page 52: High Temp Rinse

    Settings High temp rinse For better drying, the rinse temperature can be increased. This function is not available for all programs (see "Program guide"). ^ Select the desired setting and press the center button to confirm. Water plus When selected, more water will be used for the wash cycle.

  • Page 53: Factory Default

    Settings Factory default Temp. display If you have changed any settings from During a program the current the factory default, you can reset them temperature is displayed as factory back to the factory default settings. An default setting. activated External Dos and its If the temperature display is turned off respective amount of detergent or the remaining run time is being...

  • Page 54: Cleaning And Care

    (available from warm water. Then wipe dry with a soft Miele). cloth. To clean, you can also use a clean, Washing at low temperatures can allow...
  • Page 55 Cleaning and care Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface. Remove the cleaner promptly. To better maintain your appliance avoid the following: –...

  • Page 56: Triple Filter System

    Cleaning and care Triple filter system Cleaning the filters ^ Turn the dishwasher off. The triple filter system in the base of the wash cabinet retains coarse dirt from the suds solution, preventing it from reaching the circulation system and re-entering the cabinet through the spray arms.
  • Page 57 Cleaning and care ^ Replace the triple filter so it lies flat in The cover must be opened to clean the inside of the filter: the base of the wash cabinet. ^ Push the clips together in the ^ Lock the filter by turning the handle direction of the arrows as shown a, clockwise, until the arrows point to and open the cover b.

  • Page 58: Cleaning The Spray Arms

    Cleaning and care ^ Remove the lower basket. Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be checked regularly (approx. every 4 - 6 months). ^ Turn the dishwasher off. Remove the spray arms as follows: ^ Pull out the cutlery tray (if present).

  • Page 59: Frequently Asked Questions

    (see data plate for the Start/Stop indicator correct fuse rating). does not flash. – If the circuit breaker trips again, contact Miele . The dishwasher stops The circuit breaker has – Reset the circuit breaker during a program. tripped.

  • Page 60: Faults In The Water Intake Or Water Drain

    Frequently asked questions Faults in the water intake or water drain Problem Possible fault Solution One of the following fault messages is displayed: 2 Open the water The water supply is Open the water supply all the supply closed. way. 2 Water intake Before fixing the fault: –...

  • Page 61: General Problems With The Dishwasher

    Frequently asked questions General problems with the dishwasher Problem Possible fault Solution Press the - button to come The indicator lights The indicators and the and the display are display turn off out of Standby mode. dark. Only the automatically to save Start/Stop indicator energy (Standby).
  • Page 62 Frequently asked questions Problem Possible fault Solution The detergent dispenser Detergent residue is Remove the detergent cover will not close. blocking the latch. residue. The inside of the door This is normal! None. and/or the interior walls The moisture evaporates are wet after a program after some time.

  • Page 63: Noises

    Frequently asked questions Noises Problem Possible fault Solution There is a knocking A spray arm is hitting the Interrupt the program and noise in the wash dishware. rearrange items blocking cabinet. the spray arms. There is a rattling Dishware is moving Interrupt the program and around in the wash rearrange loose pieces.

  • Page 64: Poor Cleaning Results

    Frequently asked questions Poor cleaning results Problem Possible fault Solution The dishes are not The dishes were not loaded See "Loading the clean. correctly. dishwasher". The program was not suitable Select a more suitable for the requirements. program (see "Program guide").
  • Page 65 Frequently asked questions Problem Possible fault Solution Dishes are not dry, The rinse aid dosage is set Refill the reservoir, increase or glasses and too low or the rinse aid the dosage, or switch the cutlery are spotty. reservoir is empty. rinse aid product when refilling (see "Rinse aid").
  • Page 66 Frequently asked questions Problem Possible fault Solution Glasses have a Detergent deposits. Switch to another detergent brownish-blue right away. discoloration; the deposit cannot be wiped off. Glasses are dull and The glasses are not There is no remedy. discolored; the dishwasher-safe.

  • Page 67: User Maintenance Instructions

    This filter is available from Miele. ^ Replace the screen and seal. Make To clean the screen: sure they are positioned correctly.

  • Page 68: Cleaning The Drain Pump And Non-Return Valve

    User maintenance instructions Cleaning the drain pump and non-return valve If there is still some water in the wash cabinet at the end of a program, the water was not pumped out properly. The drain pump or the non-return valve might be clogged.

  • Page 69: After Sales Service

    After sales service Repairs In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type and number of your appliance.

  • Page 70: Electrical Connection

    – A damaged power cord must only be Follow the installation diagram replaced with a genuine Miele cord included with the dishwasher! by a Miele service technician.. – For technical data, see the data plate Grounding connection or the attached wiring diagram.
  • Page 71 Electrical connection The PG 8080 U / PG 8080i comes equipped with a 14/3 AWG cord for connection to a standard AC 120 V, 60 Hz power outlet with a NEMA 5-15P plug or with a 10/4 AWG cord for...

  • Page 72: Plumbing

    Plumbing The Miele waterproof system – Valves with 3/4" male thread are to be provided on site. Faucets and Providing the dishwasher was installed drain connections should be situated correctly by a qualified technician, the as close to the machine as possible, waterproof system will protect you from and be easily accessible.

  • Page 73: Water Drainage

    Plumbing Water drainage Venting the drainage system – The drain is equipped with a The drain must be vented if the non-return valve which prevents connection to the building' s drainage waste water from flowing back into system is lower than the roller guides the dishwasher through the drain for the lower basket in the door.

  • Page 74: Technical Details

    Power cable length approx. 5' 7" (1.7 m) Capacity 13 standard table settings Noise emissions Sound power level LwA 49 dB (A) Sound pressure level LpA 38 dB (A) Manufacturer's address Miele & Cie. KG, Carl-Miele-Str. 29, 33332 Gütersloh, Germany...

  • Page 75: Noise Measurement

    Noise measurement General requirements for measuring noise The dishwasher must be loaded with 16 place settings and the Normal program must be used. Installation requirements for measuring noise The dishwasher must be installed as follows:. ^ Install the dishwasher into an appropriate housing unit. ^ Secure the front panel.
  • Page 76 Noise measurement ^ Push the insulation mat supplied (depending on model) under the plinth until it is up against the appliance feet a. ^ Attach the toe-kick so that it is flush with the door front b.
  • Page 80 Alteration rights reserved / 6/25/2013 M.-Nr. 09 501 390 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

Table of Contents