Download Print this page

Miele PG 8058 Operating Instructions Manual

Hide thumbs


Quick Links

Operating instructions
Commercial dishwasher
PG 8058
To avoid the risk of accidents or damage
to the machine, it is essential to read
these instructions before it is installed
and used for the first time.
en - GB
M.-Nr. 09 866 341



  Summary of Contents for Miele PG 8058

  • Page 1 Operating instructions Commercial dishwasher PG 8058 To avoid the risk of accidents or damage en - GB  to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 866 341...
  • Page 2: Table Of Contents

    Contents Notes about these instructions.................. 5 Operating steps ........................5 Guide to the appliance ...................... 6 Overview..........................6 Control panel ......................... 7 Correct application ...................... 8 Warning and Safety instructions.................. 9 Correct installation ........................ 9 Technical safety........................9 Correct use.......................... 11 Safety with children ......................12 Accessories .........................
  • Page 3 Contents Adjusting the upper basket ....................39 Lower basket ........................41 Loading plastic trays ......................43 Operation.......................... 45 Adding cleaning agent......................45 Tips for the Super short programme ................... 46 DOS module ........................47 LEDs in the buttons ......................50 Switching on........................51 Selecting a programme .......................
  • Page 4 Contents Additional functions......................80 Reset .......................... 80 Increased water level......................  81 Interim rinse........................ 81 DOS dispensing system .................... 82 Temperature / Time ...................... 85 Releasing programmes ....................... 88 Water hardness ........................89 Display view ........................89 Display..........................90 Contrast..........................  90 Brightness ........................
  • Page 5: Notes About These Instructions

    Notes about these instructions Important warnings  Information which is important for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe.
  • Page 6: Guide To The Appliance

    Guide to the appliance Overview Door lock Upper spray arm (not visible) Runner for upper basket Connection for upper basket spray arm Lower spray arm Runner for lower basket Data plate Rinsing agent reservoir Door lock barrel Salt reservoir Dispenser for powder cleaning agent Filter combination Back: Connection for DOS modules...
  • Page 7: Control Panel

    For opening the door or interrupting a programme OK button (confirmation) For selecting or confirming entries PC / Optical interface  This is used by Miele service technicians to run diagnostic checks and can also be used to update programming data in the future.
  • Page 8: Correct Application

    Alterations or conversions to the dishwasher, or using it for purposes other than those for which it is designed, are not permitted and could be dangerous. Miele cannot be held liable for damage caused by improper or incorrect use or operation. ...
  • Page 9: Warning And Safety Instructions

    This dishwasher must only be installed, commissioned, repaired and then maintained by the Miele Service Department or an authorised Miele Service dealer. Installation, repair and other work by unqualified persons could be dangerous and Miele will not be held liable. ...
  • Page 10 The dishwasher must not be used if the electrical connection cable is damaged. If the cable is damaged it must be replaced with a special cable available from Miele. For safety reasons this must only be done by the Miele Service Department or an authorised Miele Service dealer.
  • Page 11: Correct Use

    Seek medical attention immediately if cleaning agent has been swallowed or inhaled.  Miele cannot be held liable for any effect chemical cleaning agents may have on the material of the items being cleaned. Observe the cleaning agent manufacturer's instructions with regard to storage...
  • Page 12: Safety With Children

    Only use Miele baskets and inserts with this dishwasher. Using baskets and inserts made by other manufacturers, or making modifications to Miele accessories can cause unsatisfactory cleaning results, for which Miele cannot be held liable. Any resultant damage would not be covered by the guarantee.
  • Page 13: Symbols Used

    Remove or disable the door lock prior to disposal of the dishwasher, so that children cannot become trapped inside (see "Caring for the environment"). Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
  • Page 14: Caring For The Environment

    Caring for the environment Disposal of the packing material The packaging is designed to protect the dishwasher from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
  • Page 15: User Profiles

    User profiles User groups Users can be divided into two groups: – Operatives – Experienced operators Access to "Further settings" can be blocked to general operators by using a code (see "Further settings, Code"). Operatives Operatives must be instructed in operating and loading the dishwasher and trained regularly to guarantee safe daily use.
  • Page 16: Operation Tips

    Operation tips Display The display is not a touch screen. The display is used to select or set the following: – the programme – the Delay start time – the settings During a programme, the display shows the following: – the programme name –...
  • Page 17: Menus

    Operation tips Menus This dishwasher is controlled by menus. The menus are displayed in a 3-line display on the control panel. Example: Language  deutsch english (GB) The name of the menu and a maximum of two options are shown. The currently selected option is highlighted.
  • Page 18 Operation tips System messages The  symbol denotes system messages. These give information about current processes and the status of the dishwasher. System messages are displayed individually at the end of the programme. If there are a number of system messages, subsequent messages can be displayed by pressing OK.
  • Page 19: Symbols In The Display

    Operation tips Symbols in the display Navigation arrows If a menu contains more than two options, two navigation arrows are  shown beside the options. The arrow buttons  and  can be used to scroll through the options. Dotted line ------- If a menu contains more than two options, the end of the option list is marked by a dotted line.
  • Page 20: Commissioning

    Commissioning Before using for the first time During commissioning the following settings must be carried out. You will be asked to programme settings one after the other automatically, and currently selected values have a tick  beside them. The commissioning process requires a set period of time which cannot be interrupted.
  • Page 21 Commissioning Setting the The display will change to the screen for setting the temperature unit. temperature unit Temperature unit °C °F Use the  and  arrow buttons to select the temperature unit you  want and confirm your choice using the OK button. Setting the The display will change to the screen for setting the date format.
  • Page 22 Commissioning Setting the time The display will change to the screen for setting the time of day. of day Time of day : 00 Use the arrow buttons  (higher) and  (lower) to set the hours and  minutes and confirm each entry using the OK button. If you have selected 12 h for the clock, "am"...
  • Page 23 If an AD water supply is not available and you wish to use the Beer glasses programme, the controls on the dishwasher have to be reprogrammed by a Miele service technician to enable the final rinse to be carried out with cold water.
  • Page 24: Opening And Closing The Door

    Opening and closing the door Comfort door locking mechanism This dishwasher is equipped with a Comfort door locking mechanism. This door locking mechanism helps drying by opening the door by a Super short few centimetres at the end of the programme (except Reactivation Cold Drain...
  • Page 25: Closing The Door

    Opening and closing the door Closing the door Push the baskets right in.  Raise the door upwards and push it gently until the catch audibly  engages. The door will be drawn automatically into its final closed position by the closing mechanism. ...
  • Page 26: Opening The Door Using The Emergency Release

    Opening and closing the door Opening the door using the emergency release  The emergency release may only be used when it is no longer possible to open the door normally.  If the emergency release is operated during a programme cycle, hot water can escape.
  • Page 27: Filling The Salt Reservoir

    Filling the salt reservoir Reactivation In order to achieve good cleaning results, the dishwasher needs to operate with soft mains water. Hard water results in the build-up of calcium deposits on the load and in the dishwasher. Mains water with a hardness of more than 0.7 mmol/l (4 °dH German scale) must be softened.
  • Page 28: Setting The Water Hardness Level

    Filling the salt reservoir Setting the water hardness level The water softener can be set between 0 - 12.6 mmol/l (0 - 70 °dH). Further settings Select the menu.  Water hardness Select and confirm your choice with the OK button.  Water hardness °dH (0 - 70 °dH) The factory default for the water softener is set to a hardness of...
  • Page 29 Filling the salt reservoir Settings °dH °f mmol/l Display °dH °f mmol/l Display   0    0   0   0   65   6.5   1   2   1   67   6.7   2   4   2   68   6.8   3   5   3   70   7.0   4   7   4   72   7.2   5   9   5   74...
  • Page 30: Add Salt Reminder

    Filling the salt reservoir Add salt reminder Fill the salt reservoir with dishwasher salt for reactivation as soon as  the reminder appears in the display. Confirm the message shown with the OK button.  If salt is not added, the  symbol indicating a lack of salt will appear beside the programme name on the right.
  • Page 31: Filling The Salt Reservoir

    Filling the salt reservoir Filling the salt reservoir When filling the salt reservoir only open the door halfway to  ensure that all the salt gets into the reservoir. Press the button on the lid of the salt reservoir in the direction of the ...
  • Page 32 Filling the salt reservoir Do not add any more than 2 kg of salt. As the salt reservoir is being filled, displaced water may run out. Clean any excess salt from around the reservoir opening and the  seal around it, and then close the flap. Cold To avoid corrosion in the cabinet, run the programme (without...
  • Page 33: Adding Rinsing Agent

    This will seriously damage the reservoir. Conversion to the external DOS module must be carried out only by Miele Service or by an authorised Miele Service Dealer. In the Beer glasses programme the final rinse is carried out without rinsing agent.
  • Page 34: Adding Rinsing Agent

    Adding rinsing agent Adding rinsing agent Open the door fully.  Unscrew the lid of the rinsing agent reservoir  Add rinsing agent only until it is up to the maximum mark on the  edge of the reservoir. The reservoir holds approx. 300 ml. Screw the lid of the rinsing agent reservoir back on securely so that ...
  • Page 35: Areas Of Application

    Areas of application Loading the dishwasher Remove coarse food residues from crockery. There is no need to rinse items under running water. Notes  Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides, get inside the wash cabinet. ...
  • Page 36 Areas of application Items not suitable – Wooden cutlery and crockery or items with wooden parts: these for dishwashers: may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher.
  • Page 37: Upper Basket

    Areas of application Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat resistant plastic items can also be loaded in the upper basket. O 891 upper basket With insert E 810 for e.g.
  • Page 38: Glassware Upper Basket

    Areas of application Glassware upper basket For cleaning delicate glassware O 892 upper basket With E 812 insert e.g. for 26 x Ø 65 mm glasses around the outside and 6 x Ø 60 mm glasses in the middle. Glass rail You can set the glass rail at two different heights.
  • Page 39: Adjusting The Upper Basket

    Areas of application Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower or upper basket, the upper basket can be adjusted between two positions with approx. 5 cm between each position. Pull out the upper basket. ...
  • Page 40 Areas of application Depending on the setting of the upper basket, the following plate dimensions can be accommodated: Example upper basket O 891: Upper basket in Upper basket plate Ø Lower basket plate Ø position Upper max. 15 cm 33 cm * Lower max.
  • Page 41: Lower Basket

    Areas of application Lower basket For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Only place thin, delicate glassware in the lower basket using a suitable insert or basket. U 890 lower basket carrier For plastic trays, various inserts and cutlery inserts. U 890 lower basket carrier with 2 x E 816 inserts and 2 x E 165 cutlery inserts 16 plates each with Ø...
  • Page 42 Areas of application U 890 lower basket carrier with an E 816 insert rotated through 90° With the E 165 cutlery insert, 16 plates each with Ø 33 cm and various items of cutlery can be loaded. Without the cutlery insert, 19 plates each with Ø...
  • Page 43: Loading Plastic Trays

    Which basket combination to use will depend upon the type, shape and size of the items to be washed. For further information on baskets please contact your Miele dealer or the Miele Professional Department. Example: (lower basket) U 525 5-row wire basket...
  • Page 44 Areas of application U 534 - U 537 plastic trays with compartments for different glass heights In this example the plastic tray is connected to the top frame by long extenders. (for assembly in U 876 lower basket carrier only) Assembling a The height of the basket can be altered by fitting a top frame  to the plastic tray base ...
  • Page 45: Operation

    Operation Adding cleaning agent Only use cleaning agent for commercial dishwashers. Cleaning agent can be dispensed in powder form via the powder detergent dispenser or in liquid form via an external DOS module (Optional accessory - see "DOS module"). Do not use detergent tablets. The short programme durations will not allow the tablets to dissolve properly.
  • Page 46: Tips For The Super Short Programme

    Operation Dispensing Always follow the recommendations of the cleaning agent  manufacturer. There are markings to assist with dispensing: 20, 40. The marks indicate a level of approx. 20 or 40 ml when the door is open in the horizontal position. They also indicate the approx. level in grammes (depending on the manufacturer and the coarseness of the agent).
  • Page 47: Dos Module

    In addition to the internal dispensing systems, up to two further external dispensing systems (DOS modules) can be connected for dispensing liquid chemical agents. For more information on Miele DOS modules please contact your Miele dealer or the Miele Professional Department. Labelling the...
  • Page 48 Operation Setting the For adjusting dispensing concentration see "Further settings / dispensing Additional functions / Dispensing systems". concentration Refilling or The DOS module is equipped with a level indicator which gives a changing message in the display when the level drops below the minimum. containers Refill Refill the appropriate chemical agent at the end of a programme as...
  • Page 49 Operation Checking Monitor the amount of chemical agents used by regularly checking consumption the level in the container.
  • Page 50: Leds In The Buttons

    Operation LEDs in the buttons Light-emitting diodes that indicate the status of the dishwasher are set into the buttons. Except for the Start/Stop button, which has a green LED in normal operation, all other LEDs light up yellow. In the event of a fault the Start/Stop button flashes red. Button Status ...
  • Page 51: Switching On

    Operation Switching on Open the stopcock, if it is closed.  Press the  button until the button's LED lights up.  Close the door (the  button's LED will light up).  As soon as the dishwasher is ready for operation, the display changes to show the last selected programme, e.g.
  • Page 52 Operation Programme list Programmes which cannot be selected via the short cut buttons can be selected from the programme list. Press the  button.  The following option menu appears in the display Select programme Beer glasses Short Select the programme you want using the  and  buttons and ...
  • Page 53: Starting A Programme

    Operation Starting a programme Press the Start/Stop button.  The Start/Stop button's LED will light up and the  button's LED will go out. A programme can no longer be changed after it has been started. A programme can either be interrupted (see "Interrupting a programme") or cancelled (see "Cancelling a programme").
  • Page 54: At The End Of The Programme

    Operation At the end of the programme After a programme which has ended normally the Start/Stop button's LED will go out and the  button's LED will flash. The message Programme finished will appear in the bottom line of the display. Universal Temperature 55 °C...
  • Page 55: Interrupting A Programme

    Operation Interrupting a programme A programme which is already running should only be interrupted if strictly necessary, e.g. if the wash load is moving about significantly.  Caution. The wash load and the interior of the dishwasher may be hot. Danger of scalding and burning.
  • Page 56: Cancelling A Programme

    Operation Cancelling a programme Only cancel a programme which has already started if strictly necessary, e.g. if you want to change the programme. In the event of a fault the programme will be cancelled automatically.  Caution. The wash load and the interior of the dishwasher may be hot.
  • Page 57: Additional Functions

    Additional functions Delay start The start time of a programme can be delayed, e.g. to benefit from economy rates of electricity. A delay start time of between 1 minute and 24 hours can be selected. Delay start must be switched on in the Settings menu (see "Settings , Delay start").
  • Page 58: Drying Assistance

    Additional functions Drying assistance To achieve better drying results, the dishwasher door will automatically open a few centimetres at the end of the programme. This function cannot be activated for all programmes (see "Programme chart"). Drying assistance can be activated or deactivated for the selected programme, even if it is switched on or off permanently under Settings ...
  • Page 59 Additional functions Universal Temperature 55 °C Duration If drying assistance has been activated, the drying symbol  will appear in the display to the right of the programme name. If the wash cabinet temperature after the final wash phase is higher than 67 °C (e.g.
  • Page 60: Settings

    Settings  Opening the "Settings " menu To open the settings menu: Switch the dishwasher off.  Press and hold the  button and switch the dishwasher on using  the  button. After that, the display will show the following, for example: Menu Settings ...
  • Page 61: Menu Structure

    Settings  Menu structure Factory defaults are shown. Menu Submenu 1 Submenu 2 Delay start  Drying  Language  deutsch  english (GB) etc..Venting DOS DOS 1 DOS 4 Date Date format DD:MM:YY  MM:DD:YY Time of day Set the time Display Do not display...
  • Page 62: Delay Start

    Settings  Delay start You can select whether Delay start appears in the Additional functions menu or not. Selecting will remove Delay start from the Additional functions menu for operators. To be able to delay the start of a programme, must be selected in order for it to be displayed in Additional functions.
  • Page 63: Drying

    Settings  Drying You can switch assisted drying on or off for all programmes that support this function. In Additional functions you can select or deselect drying for individual programmes (see Additional functions, Drying assistance"). Select the Settings  menu. ...
  • Page 64: Setting The Language

    Settings  Setting the language  The language set will be used in the display. The flag symbol  after the word "Language" acts as a guide if a language which you do not understand has already been set. If this is the case, keep selecting the option which has a flag after it until you reach the "Language"...
  • Page 65: Venting Dos Modules

    Settings  Venting DOS modules This option is only visible when a DOS module is connected. The dispensing system for liquid agents can only dispense reliably if the system has been purged of air. The DOS system must be vented: –...
  • Page 66: Setting The Date

    Settings  Setting the date Settings  Select the menu.  Date Select and confirm your choice with the OK button.  In the following menu you can choose between: Date Date format Date format – This option offers two variations for date format. –...
  • Page 67: Setting The Time

    Settings  Setting the time Settings  Select the menu.  Time of day Select and confirm your choice with the OK button.  In the following menu you can choose between: Time of day Display – Set the time of day Display –...
  • Page 68: Display

    Settings  Display If required, the time of day can be displayed when the dishwasher is switched off. Select Display and confirm your choice with the OK button.  The following options are available: Display Do not display Do not display –...
  • Page 69: Regulating The Volume

    Settings  Regulating the volume The dishwasher has audible tones which sound when buttons on the keypad are pressed, at the end of a programme and when there are system messages. Settings  Select the menu.  Volume Select and confirm your choice with the OK button. ...
  • Page 70: Settingthe Volume

    Settings  Setting The volume is always set in the same way. The display is also similar, the volume e.g.: Keypad tone Quieter Louder Set the volume using the arrow buttons  (louder) and  (quieter).  The volume level is represented by a bar chart. On the lowest setting the tone is switched off.
  • Page 71: Further Settings

    Further settings Opening the "Further settings" menu To open the "Further settings" menu: Switch the dishwasher off.  Press and hold the  button and switch the dishwasher on using  the  button. After that, the display will show the following, for example: Menu Settings ...
  • Page 72 Further settings Display view – The display can show the Actual temperature or the Required temperature (see "Display view") Display – The display contrast and brightness can be adjusted (see "Display") Switch off after – Automatic switch off can be activated or deactivated (see "Switch off after") Factory default –...
  • Page 73: Menu Structure

    Further settings Menu structure Factory defaults are shown. Menu Submenu 1 Submenu 2 Submenu 3 Code Release Further settings  Enter code Block Change code Log book Consumption: Water Consumpt.:Cleaning agent Consumpt.: Rinsing agent Operating hours Wash cycles Service interval Temperature unit °C ...
  • Page 74 Further settings Menu Submenu 1 Submenu 2 Submenu 3 Display view Actual temperature Required temperature  Display Contrast Contrast Set Brightness Brightness Set Switch off after  Set the time Factory default Reset  Programme settings only All settings Software version EB Id: XXXX EGL Id: XXXX EZL Id: XXXX...
  • Page 75: Code

    Further settings Code A code can be used to prevent unauthorised access to various functions and system settings on the dishwasher. Select the Further settings menu.  Code Select and press OK to open the relevant menu.  Release – Restrict access to the Further settings menu to users with...
  • Page 76 Further settings Release Block Enter code If in the menu you have selected the option, or if you Further settings have set the menu up for access via a code, you have to enter a code. Further settings Settings within the menu can then only be changed by people with administration rights.
  • Page 77: Log Book

    Further settings Log book The dishwasher controls measure the consumption levels for water, cleaning agent and rinsing agent. They also calculate the number of hours the dishwasher has been run for, how many programmes have been run and measure the service intervals. Further settings Select the menu.
  • Page 78: Temperature Unit

    Further settings Temperature unit The temperature can be shown in the display in degrees Celsius or degrees Fahrenheit. Select the Further settings menu.  Temperature unit Select and confirm your choice with the OK  button. Temperature unit °C °F °C –...
  • Page 79: Move Programme

    Further settings Move programme You can change the order of the programmes and therefore also the allocation of the shortcut buttons. You can move the programmes you use most frequently to programme places 1-3. These are then automatically allocated to the shortcut buttons.
  • Page 80: Additional Functions

    Further settings Additional functions It is possible to adapt individual parameters to tailor programme sequences to particular types of soiling and to optimise the cleaning result. Further settings Select the menu.  Additional functions Select and press the OK button to open the ...
  • Page 81: Increased Water Level

    Further settings Increased water level Increased water Select the option and confirm your choice with  level the OK button. The amount of water is shown in litres and can be increased in 0.5 litre increments up to 1.5 litres. Increased water level (0,0 - 1,5 l) Use the arrow buttons ...
  • Page 82: Dos Dispensing System

    Further settings Dispensing system DOS dispensing Select the option and confirm your choice with  system the OK button. Dispensing system DOS 2 Rinsing agent DOS1 Select the dispensing system you want and confirm your choice  with the OK button. The following options are available: DOS1 Active...
  • Page 83 Further settings DOS venting  To avoid damage to the dispensing system, make sure before venting that the containers for cleaning agent and rinsing agent are sufficiently filled and the dispensing siphons are screwed securely to the containers. DOS venting Select and confirm your choice with the OK button.
  • Page 84 Further settings Change name Changing a DOS Select and confirm your choice with the OK button.  name Change name DOS1 _ _ _ _ _ _ _ _ _ _ _ ä b c P OK # The current name is shown on the second line of the display. This can be changed using the options shown in the bottom line.
  • Page 85: Temperature / Time

    Further settings Temperature / The temperature and holding time for the main wash and final rinse Time phases can be altered in some programmes (see "Programme chart"). Select Temperature / time and confirm your choice with the OK  button. Select programme Short Universal The following options are available:...
  • Page 86 Further settings Main wash Final rinse Main wash / Final The procedure for altering settings in is the rinse same. The display also looks similar. Select the Main wash Final rinse option and confirm your choice  with the OK button. Short Final rinse temp.
  • Page 87 Further settings Holding time Holding time Select and confirm your choice with the OK button.  The holding time is set in minutes and can be set between 0 and 10 minutes in 1 minute increments. Super short In the case of the programme, the holding time is set in seconds and can be set between 0 and 300 seconds in 5 second increments.
  • Page 88: Releasing Programmes

    Further settings Releasing programmes Individual programmes can be blocked so that they cannot be used. All programmes are released for use as default. Select the Further settings menu.  Release programme Selection Release programme Select and press OK to open the relevant ...
  • Page 89: Water Hardness

    Further settings Water hardness You can use this menu to set the water softener to the water hardness of the mains supply. For further information see "Filling the salt reservoir". Display view During a programme the Actual or Required temperature can be shown in the second line of the display.
  • Page 90: Display

    Further settings Display The display menu can be used for altering the display contrast and brightness. Select the Further settings menu.  Display Contrast Brightness Display Select and press OK to open the relevant menu.  The following options are available: Contrast –...
  • Page 91: Switch Off After

    Further settings Switch off after When not in use the dishwasher will switch itself off to save energy. Further settings Select the menu.  Switch off after Select and press the OK button to open the relevant  menu. The following options are available: Switch off after –...
  • Page 92: Factory Default Setting

    Further settings Factory default setting The factory default setting can be used to reset all changed parameters in the dishwasher, or just values that have been changed for programmes, back to their default settings. Further settings Select the menu.  Factory default Reset Factory default...
  • Page 93: Software Version

    EB Id: XXXX Control and display elements. EGL Id: XXXX – Control board. EZL Id: XXXX – Relay board. EFU Id: XXXX – Frequency converter. Alterations and updates to software can only be carried out by an authorised Miele service technician.
  • Page 94: Cleaning And Care

    Cleaning and care Periodic checks The dishwasher should be serviced every 1000 hours of operation, or at least once a year by Miele Service. This maintenance will cover the following: – Electrical safety according to national regulations (VDE 0701/0702 in Germany) –...
  • Page 95: Cleaning The Control Panel

    To help prevent re-soiling (fingerprints, etc.), a suitable stainless steel conditioner (available from Miele) can be used after cleaning.  Do not use cleaning agents containing ammonia or thinners! These agents can damage the surface material.
  • Page 96: Cleaning The Door And The Door Seal

    Cleaning and care Cleaning the door and the door seal Wipe the door seal and the area beneath the door regularly with a  damp cloth to remove food deposits. Wipe away any spillages of food and drink from the sides of the ...
  • Page 97 Cleaning and care Cleaning the flat Remove the coarse filter.  and micro-fine filters Grasp the micro-fine filter by the upper rim and turn it in the  direction of the arrow to release it. Then lift it out. Remove the flat filter. ...
  • Page 98: Cleaning The Spray Arms

    Cleaning and care Cleaning the spray arms This dishwasher has three different spray arms. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly. Switch the dishwasher off. ...
  • Page 99 Cleaning and care Use a pointed object to push food particles into the spray arm jets.  Rinse the spray arms thoroughly under running water.  Replace the spray arms and check that they rotate freely. Make sure that the spray arm with the yellow bayonet fitting is fitted in the bottom of the wash cabinet.
  • Page 100: Problem Solving Guide

    Service Department.  Repair work to electrical appliances should only be carried out by an authorised Miele service technician. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Technical problems...
  • Page 101 The flow pressure at the water intake point is too high  (see "Technical data"). Contact Miele Service for advice. Check drainage Drain fault. There might be water in the wash cabinet. Clean the filter combination (see "Cleaning and care").
  • Page 102: Door

    Close the door and try to open it again using the   button. If it is still blocked: Contact the Miele Service Department.  The door is open a fraction This is not a fault. and cannot be closed The Comfort door lock has opened the door slightly at the using the ...
  • Page 103: General Problems With The Dishwasher

    Problem solving guide General problems with the dishwasher Problem Cause and remedy The dishwasher fails to The dishwasher has switched itself off after the set "switch react when buttons are off after" period to save energy. pressed. The display and Press the ...
  • Page 104: Noises

    Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which  are obstructing the spray arm. Rattling noise in the wash Items are insecure in the wash cabinet.
  • Page 105: Unsatisfactory Cleaning Result

    Problem solving guide Unsatisfactory cleaning result Problem Cause and remedy The dishes are not clean. The dishes were not loaded correctly. Please observe the instructions in "Loading the  dishwasher". The programme was not suitable for the load. Select a more suitable programme (see "Programme ...
  • Page 106 Problem solving guide Problem Cause and remedy White residue is visible on The rinsing agent dosage is set too low. crockery and cutlery, Increase the dosage (see "Further settings, Additional  clouding occurs on functions, Dispensing systems"). glassware; film can be There is no salt in the salt reservoir.
  • Page 107: Maintenance

    Maintenance Clean the water intake filters Filters are incorporated into the water inlet connection on the hose to protect the water inlet valve. If these filters get dirty they must be cleaned as otherwise too little water will flow into the wash cabinet. ...
  • Page 108: Cleaning The Drain Pump And Non-Return Valve

    Maintenance Cleaning the drain pump and non-return valve If water has not pumped away at the end of a programme, there may be a foreign object in the drain pump or blocking the non-return valve. These are easy to remove. Disconnect the dishwasher from the mains (switch the dishwasher ...
  • Page 109 Maintenance The drain pump is situated under the non-return valve (see arrow). Check the area around the drain pump for foreign objects (watch  out for glass splinters which could cause injury) and remove them before replacing the non-return valve. Carefully replace the non-return valve and secure it with the clamp.
  • Page 110: Programme Chart

    Programme chart Programme Powder cleaning agent Follow cleaning agent manufacturer's recommendations on dosage  Special glassware programme. 20 - 30 g in the cleaning agent Glasses Special dispenser Special programme for cutlery. 20 - 30 g in the cleaning agent Cutlery dispenser (Utensils)
  • Page 111 Programme chart Programme sequence Pre-wash Pre-wash Main wash Interim Interim Final rinse Drying (1) / (2) rinse rinse (1) / (2) 45 °C 50 °C 2 min 1 min 60 °C 55 °C 2 min 1 min X *) 55 °C 55 °C 30 s 30 s...
  • Page 112 Programme chart Programme Powder cleaning agent Follow cleaning agent manufacturer's recommendations on dosage Special programme for plastic items and other lightweight items. 20 - 30 g in the cleaning agent Plastics dispenser This programme is the most efficient in terms of its combined 20 - 30 g energy and water consumption for cleaning normally soiled in the cleaning agent...
  • Page 113 Programme chart Programme sequence Pre-wash Pre-wash Main wash Interim Interim Final rinse Drying (1) / (2) rinse rinse (1) / (2) 50 °C 60 °C 5 min 1 min 46 °C 50 °C 10 min 2 min Reactivation sequence X = stages included in a programme (X) = optional programme stages which can be selected (see "Further settings, Additional functions") (1) Temperature range 30 - 85°C (see "Further settings, Additional functions").
  • Page 114: After Sales Service

    Miele or your Miele Service Dealer quoting the fault code shown in the display. Contact details for Miele are given at the back of this manual. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions.
  • Page 115: Installation

    Installation Installation  In order to reduce the risk of damage from condensation, the furniture in the area around the dishwasher should be designed for commercial use. The dishwasher must be installed in a secure and level position. Any unevenness in the floor level and height of the appliance must be compensated for by adjusting the four feet.
  • Page 116: Levelling And Securing The Dishwasher

    Installation Levelling and To guarantee stability the dishwasher must be secured to the worktop securing the after levelling. dishwasher After levelling, secure the dishwasher to the continuous worktop.  With the door open, screw into the worktop through the holes in the front trim on the left and right hand sides of the dishwasher.
  • Page 117: Moving The Dishwasher

    Installation Moving the dishwasher Before moving the dishwasher screw in the adjusting feet fully so that they do not get damaged.  Do not lift the dishwasher by any protruding components, e.g. the control panel. This could break off.  Only transport the dishwasher on a sack barrow in its original packaging.
  • Page 118: Electrical Connection

    – Equipotential bonding should be carried out if required. – The mains connection cable may only be replaced by an original Miele spare part. – For technical data see data plate or wiring diagram supplied. The machine must only be operated with the voltage, frequency and fusing shown on the data plate.
  • Page 119: Plumbing

    The maximum permissible static pressure amounts to 1000 kPa (overpressure). If the water pressure does not lie in the 200-1000 kPa (2 - 10 bar) range, contact Miele Service for advice. – This dishwasher is supplied as standard for connection to cold water (blue coded hose) and hot water up to 65 °C (red coded...
  • Page 120 AD water. If AD water connection is not needed, this option can be switched  off during the commissioning process or the dishwasher controls can be reprogrammed by Miele Service. The AD inlet hose remains connected to the dishwasher.
  • Page 121: Connecting The Drain Hose

    Plumbing Connecting the drain hose – The dishwasher drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. – The dishwasher should preferably be connected to a separate on- site drainage system.
  • Page 122: Ad Water Connection

    CE-mark 2006/42/EC Machine guidelines Manufacturer's address Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany * At altitudes above 2,000 m the boiling point of water is reduced. Dishwashers installed above this altitude must be modified by the Miele Service Department.
  • Page 124 E-Mail:, Internet: Dubai Manufacturer: Miele & Cie. KG Tel: +971-4-341 84 44, Fax: +971-4-341 88 52 Carl-Miele-Straße 29, 33332 Gütersloh, Germany E-Mail:, Internet: Alteration rights reserved / Publication date: 2015-11-17 M.-Nr. 09 866 341 / 00 ...