Before using for the first time
The following functions can be selected
or set with the display:
– the wash program
– the Delay start time
– the settings
The following appears in the display
while a program is running:
– the present program step
– the remaining runtime
– any faults or other messages
In order to save energy, the display
will turn off within a few minutes if no
program is running and no button is
pressed. After several more minutes
it switches off completely (see Use -
To turn the dishwasher back on,
press the - button.
The Settings menu allows you to set the
dishwasher to suit your requirements.
See "Settings" for more information.
The normal functions of the buttons
next to the display are not active with
the Settings menu, allowing you to
select and confirm menu items using
The left and right arrows in the display
indicate that additional selections are
available. You can choose these
selections with the left or right button
below the display.
Use the center button below the display
to confirm messages or settings and to
switch to the next menu or submenu.
The currently selected setting is
marked with a check