Miele ProfiLine PG 8083 Operating Instructions Manual page 66

Frequently asked questions
Problem
There are detergent
residues in the
dispenser at the end of
a program.
The detergent dispenser
cover will not close.
The inside of the door
and/or the interior walls
are wet after a program
has finished.
There is water in the
wash cabinet at the end
of a program.
Some programs run for
a long time.
Although AutoOpen is
selected, the door
remains closed at the
end of the Short
program.
Therefore the dishware
is still moist.
66
Possible fault
The dispenser was wet
when detergent was
added.
Detergent residue is
blocking the latch.
This is normal!
The filter combination in
the wash cabinet is
clogged.
The drain pump or
non-return valve is
blocked.
There is a kink in the drain
hose.
No fault!
Certain programs have a
long runtime.
No fault!
Because of the
program's short runtime,
the AutoOpen function is
not available for the Short
program.
Solution
Make sure the dispenser
is dry before adding
detergent.
Remove the detergent
residue.
None.
The moisture evaporates
after some time.
Before fixing the fault:
– Press the - button to
turn the dishwasher off.
Clean the filter
combination (see
"Cleaning and car"e).
Clean the drain pump or
the non-return valve (see
"User maintenance
instructions").
Remove the kink.
Select a different program
(see "Program guide").
To improve the drying,
raise the rinse
temperature (see
"Settings - High temp
rinse").