Refill Messages; Brightness; Contrast; Filter Check - Miele PG 8080 U Operating Instructions Manual

Settings menu
The refill messages can be turned
off without first refilling to let the
commercial dishwasher go into
Standby mode.
But the fault messages cannot be
turned off.

Refill messages

If you want the commercial dishwasher
to switch to Standby mode in spite of
the Refill messages, you can switch
both indicator lights off together.
^ Select the desired setting and press
the centre button to confirm.

Brightness

There are seven different brightness
levels for the display.
^ Select the desired brightness and
press the centre button to confirm.

Contrast

There are seven different contrast
levels for the display.
^ Select the desired contrast and press
the centre button to confirm.
76

Filter check

You can set the length of the interval
between filter checks as a reminder.
You can set an interval between 30 and
60 wash cycles.
The factory setting is an interval of 50
wash cycles.
You can also deactivate this function.
^ Select the desired setting and press
the centre button to confirm.

External Dos.

Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module.
^ Select the desired setting and press
the centre button to confirm.
The setting will remain active until
you deactivate External dos.
Contact Miele Professional for
external liquid dispensing options.
The dispensed dosage may only
altered by Miele Service.