Table of Contents
Advertisement
Salt refill indicator
If the level in the salt container is low and a
reactivation is carried out, the following
message appears on the display:
Refill salt -appliance will be locked
shortly.
Confirm the message with OK.
Fill the salt container as described.
If the message is being displayed for the
first time, further program runs may be pos-
sible depending on the set water hardness.
If no salt is added, the message is displayed
again at the end of every program.
Reactivation notification
Approx. wash cycles left until
reactivation
You can set how many cleaning cycles in
advance you want to be notified of the up-
coming reactivation; see "Extended set-
tings", "Reactivation notification".
Filling the container for reactivation salt
Machine blocked if salt is not avail-
able
If the salt in the water softener has been
used up, a fault appears on the display and
the machine blocked from performing fur-
ther applications.
OK
Acknowledge the fault by tapping on the
warning symbol. Then follow the instruc-
tions on the display:
Fill the salt container as described.
OK
The machine lock is lifted with a delay of a
few minutes once salt has been added.
F561 Machine locked insufficient salt:
Refill regeneration salt. Machine will
unlock after a few seconds. Then start
the "Rinse" program.
OK
29
Advertisement
Table of Contents
