Autoopen; Optimize Standby - Miele ProfiLine PG 8083 Operating Instructions Manual

AutoOpen

To improve drying, the door
automatically opens a little at the end of
a program, except for Pre-rinse, Short
and Beer glasses (see Program guide).
With the Universal, Intensive and
Glassware programs, AutoOpen can
only be activated by selecting Extra
drying (see "Additional options - Extra
drying").
You can also deactivate this function.
^ Select the desired setting and press
the center button to confirm.
,
If you have deactivated the
AutoOpen function but would still
like to open the door at the end of a
program, make sure that you open
the door completely. Otherwise
steam from the dishwasher could
damage the edge of the countertop
because the fan is no longer
running.

Optimize Standby

A few minutes after the last button is
pressed or a few minutes after the end
of the program the dishwasher will
switch to Standby mode to save
energy. The display and the indicator
lights are turned off and only - flashes
slowly.
If you do not turn the dishwasher off
when the program has ended, it will
switch off automatically after several
minutes in Standby.
You can also deactivate the Optimize
Standby function. The display and the
indicator lights do not go out, and the
dishwasher turns off 6 hours after the
end of the program.
This results in higher energy
consumption.
^ Select the desired setting and press
the center button to confirm.
If Refill salt, Refill rinse aid or a fault
is displayed during a program, the
dishwasher will not switch to
Standby mode.
Settings
51