Download Print this page

Refill Salt Indicator - Miele ProfiLine PG 8083 Operating Instructions Manual

Commercial dishwasher
Hide thumbs


Before using for the first time

Refill salt indicator

^ Refill the salt reservoir as soon as the
Refill salt
message is displayed.
^ Press the center button to confirm.
The Refill salt indicator goes out.
If a sufficiently high concentration of
salt has not yet formed, Refill salt may
continue to be displayed after adding
the salt.
In this case, confirm again with the
center button.
The Refill salt message is turned off if
you have programmed the dishwasher
to a water hardness below 4 °d
(4 gr/gal).
Immediately after each refill run
the Pre-wash or Short program
without a load in order to remove
any traces of salt from the cabinet.



  Also See for Miele ProfiLine PG 8083

  Related Manuals for Miele ProfiLine PG 8083

This manual is also suitable for:

Pg 8083 scvi