General Problems With The Dishwasher - Miele ProfiLine PG 8083 Operating Instructions Manual

General problems with the dishwasher

Problem
The indicator lights
and the display are
dark. Only the
indicator light -
flashes slowly.
The interior lighting
does not come on
when the door is
opened.
The following fault
message is
displayed:
F Salt reservoir cover
The buzzer sounds
and the optical
interface flashes
during the program
sequence.
The buzzer sounds
during the program.
The following fault
message is
displayed:
: Spray arm blocked
Frequently asked questions
Possible fault
The indicators and the
display turn off
automatically to save
energy (Standby).
The interior lighting was
permanently turned off.
The salt reservoir cover
is not properly closed.
The middle spray arm is
blocked by dishware.
The spray arm jets of the
middle arm are clogged.
Solution
Press the - button to come
out of Standby mode.
Turn the interior lighting back
on (see "Additional options -
BrilliantLight").
– Close the salt reservoir
cover.
If the salt reservoir cover
opened during a program:
– Push the - button to turn
the dishwasher off (even if it
appears to be off) and on
again.
– Re-start the program.
Open the dishwasher door
and rearrange items blocking
the spray arms.
– Press the - button to turn
the dishwasher off.
Then:
– Clean the spray arm (see
"Cleaning and care").
65