Poor Cleaning Results - Miele ProfiLine PG 8083 Operating Instructions Manual

Frequently asked questions

Poor cleaning results

Problem
The dishes are not
clean.
There are streaks
on the glasses and
cutlery. The
glasses take on a
bluish sheen; the
deposits can be
wiped off.
68
Possible fault
The dishes were not loaded
correctly.
The program was not suitable
for the requirements.
Not enough detergent was
dispensed.
The spray arms are blocked
by dishware.
The filter combination in the
wash cabinet is clogged or
not correctly inserted.
The spray arm jets might be
clogged as a result.
The non-return valve is stuck
in the open position. Dirty
wash water will run back into
the wash cabinet.
The rinse aid dosage is set
too high.
Solution
See "Loading the
dishwasher".
Select a more suitable
program (see "Program
guide").
Use more detergent, or
switch to another detergent.
Check by turning the spray
arms and rearrange the
dishes if necessary.
Clean the filter combination
or insert it correctly.
Clean the spray arm jets, if
necessary (see "Cleaning
and care").
Clean the drain pump and
the non-return valve (see
"User maintenance
instructions").
Reduce the dosage (see
"Settings - Rinse aid").