For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0-6 ml.
The factory setting is 3 ml of rinse aid.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Select the desired amount of rinse
aid and press the center button to
If activated, the buzzer sounds at the
end of a program and when a fault
Buzzer at the end of a program
The buzzer at the end of a program
sounds at intervals of four times with a
brief break in between. The buzzer
sounds if you do not turn off the
Buzzer sounds for a fault
The fault buzzer sounds at intervals of
four times without pausing.
The buzzer for a fault cannot be
Setting the buzzer volume
There are seven different volume
settings for the buzzer. The buzzer is
deactivated if no volume setting is
^ Select the desired volume and press
the center button to confirm.