Download Print this page

Miele PG 8056 Operating Instructions Manual

Commercial dishwasher
Hide thumbs

Advertisement

Operating instructions
Commercial dishwasher
PG 8056
To prevent accidents and machine
damage, you absolutely must read
these instructions before installation
or use.
en - US
M.-Nr. 09 981 900

Advertisement

loading

  Summary of Contents for Miele PG 8056

  • Page 1 Operating instructions Commercial dishwasher PG 8056 en - US  To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. M.-Nr. 09 981 900...
  • Page 2: Table Of Contents

    Contents Guide to the manual ......................5 Proper use ..........................6 IMPORTANT SAFETY INSTRUCTIONS ................7 Proper installation........................7 Technical safety ........................7 Proper use ..........................9 Children in the vicinity ......................10 Accessories ......................... 10 Symbols attached to the commercial dishwasher .............. 11 Disposal of the commercial dishwasher ................
  • Page 3 Contents Activation..........................43 Selecting a program ......................43 Starting a program....................... 44 At the end of the program ....................45 Deactivation......................... 45 Unloading the dishwasher ....................45 Interrupting a program......................46 Cancelling a program ......................47 Program chart ........................48 Additional functions ......................
  • Page 4 Contents Display ..........................84 Contrast........................... 84 Brightness ........................85 Switch off after ........................86 Factory default setting ......................87 Software version........................88 Cleaning and care......................89 Cleaning the control panel....................89 Cleaning the appliance front....................89 Cleaning the wash cabinet ....................89 Cleaning the door and the door seal ...................
  • Page 5: Guide To The Manual

    Guide to the manual Warnings  Information which is important for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe.
  • Page 6: Proper Use

    Alterations or conversions to the dishwasher, or using it for purposes other than those for which it is designed, are not permitted and could be dangerous. Miele cannot be held liable for damage caused by improper or incorrect use or operation. ...
  • Page 7: Important Safety Instructions

    Miele or an authorized Miele Service dealer.  Faulty components may only be replaced by genuine Miele original parts. Only when these parts are fitted can Miele guarantee the safety standards of the appliance.  The electrical safety of this commercial dishwasher can only be guaranteed when it is connected to a correctly installed grounding conductor system.
  • Page 8 If the cable is damaged, it must be replaced with a special connecting cable available from Miele. For safety reasons, this may only be performed by the Miele Service Department or an authorized Miele Service dealer. ...
  • Page 9: Proper Use

     Miele cannot be held liable for any effect chemical detergents may have on the material of the items being cleaned. Observe the detergent manufacturer's instructions with regard to storage conditions, use, and dosage.
  • Page 10: Children In The Vicinity

    Accessories  Only use genuine Miele original spare parts and accessories with this dishwasher. Miele will provide you with the article designations of the accessories.  Only use Miele baskets and inserts with this dishwasher. Using...
  • Page 11: Symbols Attached To The Commercial Dishwasher

    Remove or disable the door lock prior to disposal of the dishwasher, so that children cannot become trapped inside (see "Caring for the environment"). Miele cannot be held liable for damage caused by failure to comply with these safety instructions and warnings.
  • Page 12: Appliance Description

    Appliance description Appliance overview a Door lock b Upper spray arm (not visible) c Runner for upper basket d Connection for upper basket spray arm e Lower spray arm f Runner for lower basket g Data plate h Rinse aid reservoir i Door lock barrel j Reservoir for reactivation salt k Dispenser for powder detergent...
  • Page 13: Control Panel

    For canceling a process in the user interface (not for canceling programs) g Start/Stop button For starting or canceling a program h OK button (acknowledgement) For selecting or confirming entries in the user interface i Optical interface  Testing and transmission point for Miele service technicians.
  • Page 14: User Profiles

    User profiles User groups Users can be divided into two groups: – Daily operators – Experienced operators Access to "Additional settings" can be blocked to general, daily operators by using a code (see "Additional settings, Code"). Daily operators Daily operators must be instructed in operating and loading the dishwasher and trained regularly to guarantee safe daily use.
  • Page 15: Operation Tips

    Operation tips Display functions The display is not a touch screen. The following functions can be selected or set with the display: – The program – The delay start time – The settings The following appears in the display while a program is running: –...
  • Page 16: Menus

    Operation tips Menus The user interface of the commercial dishwasher is divided into menus. The menus are displayed in a 3-line display on the control panel. Example: Language  deutsch english (AU) The name of the menu and a maximum of two options are shown. The currently selected option is highlighted.
  • Page 17 Operation tips System messages The  symbol denotes system messages. These give information about current processes and the status of the dishwasher. System messages are displayed individually at the end of the program. If there are a number of system messages, subsequent messages can be displayed by pressing OK.
  • Page 18: Symbols In The Display

    Operation tips Symbols in the display Navigation arrows If a menu contains more than two options, two navigation arrows are  shown beside the options. The arrow buttons  and  can be used to scroll through the options. Dotted line ------- If a menu contains more than two options, the end of the option list is marked by a dotted line.
  • Page 19: Commissioning

    Commissioning Commissioning During commissioning, the following settings must be carried out. You will be asked to program settings one after the other automatically, and currently selected values have a tick  beside them. The commissioning process requires a set period of time which cannot be interrupted.
  • Page 20 Commissioning Setting the The display will change to the screen for setting the temperature unit. temperature unit Temperature unit °C °F Use the  and  arrow buttons to select the temperature unit you  want and confirm your selection using the OK button. Setting the date The display will change to the screen for setting the date format.
  • Page 21 Commissioning Setting the clock The selected clock display is shown. Time of day : 00 Use the arrow buttons  (higher) and  (lower) to set the hours and  minutes and confirm each entry using the OK button. If you have selected 12 h for the clock, "am" or "pm" will appear beside the time.
  • Page 22 This setting can be turned off if the dishwasher cannot be connected to all available plumbing connections. If individual plumbing connections are turned off, they can only be reactivated by Miele Service. Plumbing connections Accept Cold water Use the  and  arrow buttons to select the plumbing connections ...
  • Page 23: Opening And Closing The Door

    Opening and closing the door Opening the door The control panel also serves as a door handle. Grasp the handle underneath the control panel and lower the door  to open. If the door is opened during operation all functions are automatically interrupted (see "Operation, Interrupting a program").
  • Page 24: Filling The Salt Container

    Filling the salt container Reactivation In order to achieve good cleaning results, the dishwasher water needs to be softened. The water is softened automatically in the water softener. Dishwasher salt is required for reactivation and the degree of water hardness must be set on the dishwasher to ensure problem-free functioning of the water softener (see "Additional settings, Water hardness").
  • Page 25: Filling The Salt Container

    Filling the salt container Only a few more program cycles are possible, depending on the program selected and the water hardness set. The dishwasher is locked against operation if additional program cycles are run without salt being refilled. Salt container empty, Program locked When reactivation salt is added, the appliance will unlock itself after a few seconds.
  • Page 26 Filling the salt container Add salt only until the funnel of the salt reservoir is full, so that it  can close properly. The salt reservoir will hold approx. 4.4 lbs (2 kg) of salt on the first fill depending on the degree of coarseness. Subsequent refills may take less salt, as there may still be salt remaining in the reservoir.
  • Page 27: Adding Rinse Aid

    (including liquid detergent). This will seriously damage the reservoir. Conversion to the external DOS module must be carried out only by Miele Service or by an authorized dealer. Rinse aid Refill rinse aid at the end of a program as soon as the message ...
  • Page 28: Adding Rinse Aid

    Adding rinse aid Adding rinse aid Open the door all the way.  Unscrew the lid of the rinse aid reservoir.  Add rinse aid only until it is up to the maximum mark on the edge of  the reservoir. The rinse aid reservoir holds approx.
  • Page 29: Application Technology

    Application technology Preparing the load Remove coarse food residues from the dishware. There is no need to rinse items under running water! Tips:  Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides, get inside the machine. ...
  • Page 30 Application technology Items not suitable – Wooden cutlery and cookware or items with wooden parts: these for dishwashers: may discolor and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. –...
  • Page 31: Upper Basket

    Application technology Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat resistant plastic items can also be loaded in the upper basket. O 891 upper basket With insert E 810 for e.g. 20 cups, 33 saucers or 17 dessert plates. Cup rack The cup rack can be set at two different widths so that it can also accommodate large cups.
  • Page 32: Adjusting The Upper Basket

    Application technology Adjusting the upper basket In order to gain more space for taller pieces of cookware in the lower or upper basket, the upper basket can be adjusted in between two positions with 2" (5 cm) between each position. Pull the upper basket out.
  • Page 33 Application technology Depending on the setting of the upper basket, the following plate dimensions can be accommodated: Example upper basket O 891: Upper basket in Upper basket plates Lower basket plate Ø position Ø Upper max. 5 1/8" (15 cm) 13"...
  • Page 34: Lower Basket

    Application technology Lower basket For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Always place thin, delicate glassware in the lower basket using a suitable insert or basket. U 890 lower basket For plastic trays, various inserts and cutlery inserts. U 890 lower basket with 2 x E 816 inserts and 2 x E 165 cutlery inserts 16 plates with Ø...
  • Page 35 Application technology U 890 lower basket with an E 816 insert rotated by 90° With the E 165 cutlery insert, 16 plates with Ø 13" (33 cm) each and various cutlery can be loaded. Without the cutlery insert, 19 plates with Ø...
  • Page 36: Use Of Plastic Trays

    The type, shape and size of the items to be washed will determine which basket combination to use. For additional information on baskets please contact your Miele dealer or the Miele Service. Examples: (lower baskets)
  • Page 37 Application technology U 534 - U 537 plastic trays with compartments for different glass heights In this example the plastic tray is connected to the top frame by long extenders. (for assembly in U 876 lower basket only) Assembling a The height of the base basket can be altered by fitting a top frame ...
  • Page 38: Operation

    Operation Adding detergent Only use detergent for commercial or residential dishwashers. The detergent can be dispensed in powder form via the powder detergent dispenser or in liquid form via the G 60 DOS module (Optional accessory - see "DOS module"). Never use detergent tablets.
  • Page 39: Tips For The Rapid Program

    Operation Dispensing Always follow the recommendations of the detergent manufacturer.  There are markings to assist with dispensing: 20, 40. The marks indicate a level of approx. 20 or 40 ml (0.7 oz or 1.3 oz) when the door is open in the horizontal position. They also indicate the approx. level in grams (depending on the manufacturer and the coarseness of the agent).
  • Page 40: Dos Module

    (DOS modules) can be connected for dispensing liquid process chemicals. The DOS module comes with a separate installation manual. For more information on Miele DOS modules, please contact your Miele dealer or Miele Service. Labelling of the The color coding of the siphons helps to ensure correct dispensing.
  • Page 41 Dispensing To ensure trouble-free operation, regular maintenance of the DOS system module should be carried out at specified intervals only by Miele maintenance Service or an authorized Miele dealer. The DOS G 60 module dispensing hoses must be replaced at 1 - 1 yearly intervals.
  • Page 42 Operation LEDs in the Light-emitting diodes that indicate the status of the dishwasher are keypad set into the keypad. Except for the Start/Stop button, which has a green LED in normal operation, all other LEDs light up yellow. In the event of a fault the Start/Stop button flashes red. Keypad Status The dishwasher is switched on.
  • Page 43: Activation

    Operation Activation Open the stopcock, if it is closed.  Press the  button until the LED on the keypad lights up.  Close the door.  As soon as the dishwasher is ready for operation, the display changes to show the last selected program, e.g.: Normal plus Temperature...
  • Page 44: Starting A Program

    Operation The selected program will be shown in the display, e.g.: Normal plus Temperature 55 °C Duration The LED for the  button will light up and the LED for the Start/Stop button will flash. Delay start can be selected by pressing the OK button (see "Additional functions").
  • Page 45: At The End Of The Program

    Operation At the end of the program After a program that has ended normally, the LED for the Start/Stop button will go out. The message Program finished will appear in the bottom line of the display. Normal plus Temperature 55 °C Program finished In addition, a buzzer will also sound for approx.
  • Page 46: Interrupting A Program

    Operation Interrupting a program A program which is already running should only be interrupted if strictly necessary, e.g. if the wash load is moving significantly.  Caution! The wash load and the interior of the dishwasher may be hot. Danger of scalding and burning. Open the door.
  • Page 47: Cancelling A Program

    Operation Cancelling a program Only cancel a program which has already started if absolutely necessary, e.g. if you want to change the program. In the event of a fault, the program will be cancelled automatically.  Caution! The wash load and the interior of the dishwasher may be hot.
  • Page 48: Program Chart

    Program chart Program When to use Powder detergent (if liquid detergent is not dispensed) Follow the manufacturer's recommendations "Quick program" for lightly soiled items that are in continual use 1.5 - 2 tbsp. (20 - 30 g) and that have a fresh, easily removable food residue. placed on the inside of the Rapid door...
  • Page 49 Program chart Program cycle Pre-wash Pre-wash Main wash Interim rinse Interim rinse Final rinse (1) / (2) (1) / (2) X *) 131°F (55°C) 131°F (55°C) 30 s 30 s 131°F (55°C) 140°F (60°C) 2 min 1 min 140°F (60°C) 158°F (70°C) 3 min 10 min...
  • Page 50 Program chart Program When to use Powder detergent (if liquid detergent is not dispensed) Follow the manufacturer's recommendations Special program for plastic items and other lightweight items. 1.5 - 2 tbsp. (20 - 30 g) in the detergent dispenser Plastics Energy-saving program, which is the most efficient in terms of 1.5 - 2 tbsp.
  • Page 51 Program chart Program cycle Pre-wash Pre-wash Main wash Interim rinse Interim rinse Final rinse (1) / (2) (1) / (2) 122°F (50°C) 140°F (60°C) 5 min 1 min 115°F (46°C) 122°F (50°C) 10 min 2 min Reactivation cycle X = sections included in a program (X) = optional sections which can be selected (see "Additional settings, Additional functions") (1) Temperature range 86 - 158°F (30 - 70°C) (see "Additional settings, Additional functions").
  • Page 52: Additional Functions

    Additional functions Delay Start The start time of a program can be delayed, e.g. to benefit from economy rates of electricity. A delay start time of between 1 minute and 24 hours can be selected. Delay start must be switched on in the Settings menu (see "Settings , Delay start").
  • Page 53: Settings

    Settings  Accessing the "Settings " menu To open the "Settings" menu: Turn the dishwasher off.  Press and hold the  button and switch the dishwasher back on  using the  button. After that, the display will show the following, for example: Menu Settings ...
  • Page 54: Menu Structure

    Settings  Menu structure The factory defaults for the menu structure are shown. Menu 1. Submenu 2. Submenu 1. Delay start No  2. Language German  English (US) etc. 3. DOS venting DOS1 DOS4 4. Date Date format DD:MM:YY  MM:DD:YY 5.
  • Page 55: Delay Start

    Settings  Delay start You can select whether delay start appears in the Additional Functions menu or not. Selecting will remove delay start from the Additional Functions menu for operators. To be able to delay the start of a program, must be selected in order for it to be displayed in Additional Functions.
  • Page 56: Setting The Language

    Settings  Setting the language  The language set will be used in the display. The flag  after the word "Language" acts as a guide if a language which you do not understand has already been set. If this is the case, keep selecting the option which has a flag after it until you reach the "Language"...
  • Page 57: Venting Dos Modules

    Settings  Venting DOS modules This option is only visible when a DOS module is connected. The dispensing system for liquid agents can only dispense reliably if the system has been purged of air. The DOS system must be vented: –...
  • Page 58: Setting The Date

    Settings  Setting the date Select the Settings  menu.  Select and confirm the entry with the OK button. Date  In the following menu, you can choose between: Date Date format – Date format This option offers two variations for date format. –...
  • Page 59: Setting The Clock

    Settings  Setting the clock Select the Settings  menu.  Select and confirm the entry with the OK button. Time of day  In the following menu, you can choose between: Time of day Display – Set the time of day. –...
  • Page 60: Display

    Settings  Display If required, the time of day can be displayed when the dishwasher is turned off. Select and confirm the entry with the OK button. Display  The following options are available: Display Do not display – Do not display Time of day is not displayed.
  • Page 61: Regulating The Volume

    Settings  Regulating the volume The dishwasher has audible tones which sound when buttons on the keypad are pressed, at the end of a program, and when there are system messages. Select the menu. Settings   Select Volume and confirm the entry with the OK button. ...
  • Page 62: Setting The Volume

    Settings  Setting the The volume is always set in the same way. The display is also similar, volume e.g.: Keypad tone Quieter Louder Set the volume using the arrow buttons  (louder) and  (quieter).  The volume level is represented by a bar graph. On the lowest setting the tone is turned off.
  • Page 63: Additional Settings

    Additional settings Opening the "Additional settings" menu To open the "Additional settings" menu: Turn the dishwasher off.  Press and hold the  button and turn the dishwasher back on  using the  button. After that, the display will show the following, for example: Menu Settings ...
  • Page 64 Additional settings – Display Adjustment of the display contrast and brightness (see "Display") – Switch off after Automatic switch-off can be activated or deactivated (see "Switch off after") – Factory default Reset of all parameters to the factory default settings (see "Factory default") –...
  • Page 65: Menu Structure

    Additional settings Menu structure The factory defaults for the menu structure are shown. Menu 1. Submenu 2. Submenu 3. Submenu 1. PIN code Release Additional settings Yes  Enter PIN code Block Change PIN code 2. Log book Consumption: water Consumption: detergent Consumption: rinse...
  • Page 66 Additional settings Menu 1. Submenu 2. Submenu 3. Submenu 8. Display view Actual temperature Required temperature  9. Display Contrast Set the contrast Brightness Set the brightness 10. Turn off after Yes  Set the time 11. Factory default Reset No ...
  • Page 67: Code

    Additional settings CODE A PIN code can be used to prevent unauthorized access to various functions and system settings on the dishwasher. Select the Additional settings menu.  Select Code and press OK to open the relevant menu.  – Release Restrict access to the Additional settings...
  • Page 68 Additional settings Enter PIN code If in the Release menu you have selected the Block option, or if you have set the Additional settings menu up for access via a PIN code, you have to enter a PIN code. Settings within the Additional settings menu can then only be changed by people with administration rights.
  • Page 69: Log Book

    Additional settings Log book The dishwasher controls measure the consumption levels for water, detergent and rinse aid. They also calculate the number of hours the dishwasher has been run and the number of programs that have been run and measure the service intervals. Select the Additional settings menu.
  • Page 70: Temperature Unit

    Additional settings Temperature unit The temperature can be shown in the display in degrees Celsius or degrees Fahrenheit. Select the Additional settings menu.  Select Temperature unit and confirm the entry with the OK button.  Temperature unit °C °F –...
  • Page 71: Moving A Program

    Additional settings Moving a program You can change the order of the programs and therefore also the allocation of the shortcut buttons. You can move the programs you use most frequently to program places 1-3. These are then automatically allocated to the shortcut buttons.
  • Page 72: Additional Functions

    Additional settings Additional functions It is possible to adapt individual parameters to tailor program cycles to particular types of soiling and to optimize the cleaning result. Select the Additional settings menu.  Select Additional functions and press OK to open the relevant menu. ...
  • Page 73: Increased Water Level

    Additional settings Increased water Select the Increased water level option and confirm your choice with  level the OK button. The amount of water is shown in liters and can be increased in 0.5 liter (1 pint) increments up to 1.5 liters (1 1/2 quarts). Increased water level (0,0 ­...
  • Page 74: Dos Dispensing Systems

    Additional settings DOS dispensing Select the Dispensing system option and confirm your choice with  systems the OK button. Dispensing system DOS 2 Rinsing aid DOS1 Select the dispensing system you want and confirm your choice  with the OK button. The following settings are available: DOS1 Active...
  • Page 75 Additional settings DOS venting  To avoid damage to the dispensing system, make sure before venting that the containers for detergent and rinse aid are sufficiently filled and the dispensing siphons are screwed securely to the containers. Select DOS priming and confirm the entry with the OK button.
  • Page 76 Additional settings Changing a DOS Select Change name and confirm the entry with the OK button.  name Change name DOS1 _ _ _ _ _ _ _ _ _ _ _ ä b c P OK # The current name is shown on the second line of the display. This can be changed using the options shown in the bottom line.
  • Page 77: Temperature / Time

    Additional settings Temperature / The temperature and holding time for the main wash and final rinse time phases can be altered in some programs (see "Program chart"). Select Temperature / Time and confirm the entry with the OK  button. Select program Normal Normal plus...
  • Page 78: Main Wash / Final Rinse

    Additional settings Main wash / Final The procedure for altering settings in Main wash 1 Final rinse 1 rinse the same. The display also looks similar. Select the option and confirm the entry Main wash 1 Final rinse 1  with the OK button.
  • Page 79: Holding Time

    Additional settings Holding time Select Holding time and confirm the entry with the OK button.  The holding time is set in minutes and can be set between 0 and 10 minutes in 1 minute increments. In the case of the Rapid program, the holding time is entered in seconds and can be changed from 0 to 300 seconds in 5 second...
  • Page 80: Release Program

    Additional settings Release program Individual programs can be blocked so that they cannot be used. All programs are released for use as default. Select the Additional settings menu.  Release program Selection Select and press OK to open the relevant menu. Release program ...
  • Page 81: Water Hardness

    Additional settings Water hardness In order to achieve good cleaning results, the dishwasher needs to operate with soft (low in calcium deposits) water. Hard water results in a build-up of calcium deposits on cookware and in the dishwasher. Water with a hardness level higher than 4 °dH needs to be softened. This takes place automatically in the integrated water softener.
  • Page 82: Settings Table

    Additional settings Settings table °dH mmol/l Display °dH mmol/l Display 19 *) 10.1 10.3 10.4 10.6 10.8 11.0 11.2 11.3 11.5 11.7 11.9 12.1 12.2 12.4 12.6 *) Factory default setting...
  • Page 83: Display View

    Additional settings Display view During a program, the actual or target temperature can be shown in the second line of the display. Select the Additional settings menu.  Display view Actual temperature Required temperature ( Select and press OK to open the relevant menu. Display view ...
  • Page 84: Display

    Additional settings Display The display menu can be used for altering the display contrast and brightness. Select the Additional settings menu.  Display Contrast Brightness Select and press OK to open the relevant menu. Display  The following settings are available: –...
  • Page 85: Brightness

    Additional settings Brightness Select the Brightness option and confirm your choice with the OK  button. The brightness range is shown as a bar graph in the display. Brightness Darker Brighter Use the arrow buttons  (brighter)  (darker) to set the brightness ...
  • Page 86: Switch Off After

    Additional settings Switch off after When not in use, the dishwasher will turn itself off to save energy. Select the menu. Additional settings  Select Switch off after and press OK to open the relevant menu.  The following options are available: Switch off after –...
  • Page 87: Factory Default Setting

    Additional settings Factory default setting The factory default setting can be used to reset all changed parameters in the dishwasher back to their default settings or just values that have been changed for programs. Select the menu. Additional settings  Factory default Reset Select...
  • Page 88: Software Version

    The software version of the control board. – EZL Id: XXXX The software version of the relay board. – EFU Id: XXXX The software version of the frequency converter. Alterations and updates to software can only be carried out by an authorized Miele service technician.
  • Page 89: Cleaning And Care

    To help prevent re-soiling (fingerprints, etc.), a suitable stainless steel conditioner can be used after cleaning (e.g., Neoblank, which can be obtain from Miele Service).  Do not use cleaning agents containing ammonia or thinners! These agents can damage the surface material.
  • Page 90: Cleaning The Door And The Door Seal

    Cleaning and care Cleaning the door and the door seal Wipe the door seal and the area beneath the door regularly with a  damp cloth to remove food deposits. Wipe away any spillages of food and beverages from the sides of ...
  • Page 91 Cleaning and care Cleaning the flat Remove the coarse filter.  and micro-fine filters Grasp the micro-fine filter by the upper rim and turn it in the  direction of the arrow to release it. Then lift it out. Remove the flat filter. ...
  • Page 92: Cleaning The Spray Arms

    Cleaning and care Cleaning the spray arms This dishwasher has three different spray arms. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly. Turn the dishwasher off. ...
  • Page 93 Cleaning and care Use a pointed object to push food particles that are stuck in the  spray arm jets into the spray arm. Rinse the spray arms thoroughly under running water.  Replace the spray arms and check that they rotate freely. Make sure that the spray arm with the yellow bayonet fitting is fitted in the bottom of the wash cabinet.
  • Page 94: Frequently Asked Questions

    The circuit breaker has tripped. during a program. Reset the circuit breaker (see data plate for the correct  fuse rating). If the circuit breaker trips again, contact Miele Customer  Service. One of the following fault Before fixing the fault: messages is displayed: Turn the dishwasher off with the ...
  • Page 95 The flow pressure at the water intake point is too low  (see "Technical data"). Contact Miele Service for advice. Fault 412-414 Water inlet fault. One of these numbers will appear in the display if the flow pressure is too high and the program will be cancelled.
  • Page 96: Unusual Behavior Of The Dishwasher

    Frequently asked questions Unusual behavior of the dishwasher Problem Possible cause and solution The dishwasher fails to The dishwasher has turned itself off after the set "switch off react when buttons are after" duration to save energy. pressed. The display and Press the ...
  • Page 97: Noises

    Frequently asked questions Noises Problem Possible cause and solution There is a knocking noise A spray arm is hitting the dishware. in the wash cabinet. Interrupt the program, and rearrange the items which are  obstructing the spray arm. There is a rattling noise in Dishware is moving around in the wash cabinet.
  • Page 98: Poor Cleaning Results

    Frequently asked questions Poor cleaning results Problem Possible cause and solution The dishes are not clean. The dishes were not loaded correctly. Please observe the instructions in "Loading the  dishwasher." The program was not suitable for the requirements. Select a more suitable program (see "Program guide)". ...
  • Page 99 Frequently asked questions Problem Possible cause and solution White residue is visible on The rinse aid dosage is too low. cookware and cutlery, Increase the dosage (see "Additional settings, Additional  clouding occurs on functions, Dispensing systems"). glassware; film can be The salt reservoir is empty.
  • Page 100: Frequently Asked Questions

    Frequently asked questions Cleaning the filters in the water inlet Filters are incorporated into the water inlet connection on the hose to protect the water inlet valve. If these filters get dirty they must be cleaned as otherwise too little water will flow into the wash cabinet. ...
  • Page 101: Cleaning The Drain Pump And Non-Return Valve

    Frequently asked questions Cleaning the drain pump and non-return valve If water has not pumped out at the end of a program, there may be a foreign object in the drain pump or blocking the non-return valve. These are easy to remove. Disconnect the dishwasher from the water supply and the electrical ...
  • Page 102 Frequently asked questions The drain pump is situated under the non-return valve (see arrow). Check the area around the drain pump for foreign objects (watch  out for glass splinters which could cause injury) and remove them before replacing the non-return valve. Carefully replace the non-return valve and secure it with the clamp.
  • Page 103: After Sales Service

    Contact details for the Miele Technical Service Department can be found at the back of this manual.  When contacting Miele, please quote the model number of your dishwasher together with the 8 digit machine number. The model number and the machine number are both shown on the...
  • Page 105: Installation Instructions

    Installation instructions Information is subject to change. Please refer to our Website to obtain the most current product specification and technical and warranty information. To prevent accidents and machine damage, read these instructions before installation or use.
  • Page 106: Caring For The Environment

    Caring for the environment Disposal of packaging material The packaging is designed to protect the dishwasher from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
  • Page 107: Installation

    Installation Installation  In order to reduce the risk of damage from condensation, the furniture in the area around the commercial dishwasher should be designed for commercial use. The dishwasher must be installed in a secure and level position. Any unevenness in the floor level and height of the appliance must be compensated for by adjusting the four feet.
  • Page 108: Moving The Dishwasher

    Installation Levelling and To guarantee stability; the dishwasher must be secured to the counter securing the after levelling. dishwasher After levelling, secure the dishwasher to the continuous counter.  With the door open, screw into the counter through the holes in the front trim on the left and right hand sides of the dishwasher.
  • Page 109: Electrical Connection

    30 – If necessary, equipotential bonding must be carried out. – The power cord may only be replaced by an original Miele part. – For technical data, see the data plate or the attached wiring...
  • Page 110: Plumbing

    The maximum permissible static pressure amounts to 145 psi / 1000 kPa (overpressure). If the water pressure does not lie in the 29-145 psi / 200-1000 kPa range, ask Miele how to proceed. – The dishwasher is supplied as standard for connection to cold water (blue-coded hose) and hot water up to 149°F (65°C) (red-...
  • Page 111 Plumbing  Do NOT shorten or otherwise damage the inlet hoses (see diagram). Also refer to the supplied installation diagram!
  • Page 112: Connecting The Water Drain

    Plumbing Connecting the water drain – The drain is equipped with a non-return valve which prevents waste water from flowing back into the dishwasher through the drain hose. – The dishwasher should preferably be connected to a separate on- site drainage system. If no separate connection is available, we recommend connection to a double chamber siphon.
  • Page 113: Technical Details

    Noise emission values Built-under appliance with wooden beam in front of plinth in Short program Sound power in LwA 59 dB(A) Sound pressure in LpA 47 dB(A) Certification marks UL 749 Manufacturer's address Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
  • Page 116 Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 609-419-9898 Fax: 609-419-4241 www.mieleusa.com Technical Service & Support Nationwide Phone: 800-991-9380 Fax: 800-220-1348 proservice@mieleusa.com...