Yamaha WR450F(W) Owner's Service Manual page 180

1 Throttle cable (pull)
2 Throttle cable (return)
3 Catch tank hose
4 Ignition coil
5 Clamp
6 Air induction hose (air cut-off valve - rear of cyl-
inder head)
7 Catch tank breather hose
CABLE ROUTING DIAGRAM
È Cross the pull and push throttle cables.
É Fasten the catch tank hose and air induction
hose (air cut-off valve - rear of cylinder head)
onto the frame. Locate the clamp end facing
toward the lower side of the frame and cut off the
tie end.
Ê Fasten the catch tank breather hose and carbu-
retor breather hoses together.
Ë Pass the carburetor breather hose (of the throt-
tle cable cover) through the hose holder.
2 - 26
SPEC