Kick Axle Assembly Installation - Yamaha WR450F(W) Owner's Service Manual

KICK AXLE AND SHIFT SHAFT
Kick axle assembly
1. Install:
NOTE:
• Apply the molybdenum disulfide oil on the
inner circumferences of the kick gear and
ratchet wheel.
• Align the punch mark a on the ratchet wheel
with the punch mark b on the kick axle.
2. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.
3. Install:
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
4 - 80
• Kick gear 1
• Plain washer 2
• Circlip 3
New
• Ratchet wheel 4
• Spring 5
• Plain washer 6
• Circlip 7
New
To kick axle 8.
• Torsion spring 1
To kick axle 2.
• Spring guide 1
ENG