Fwsettodefault - Brocade Communications Systems Brocade 8/12c Command Reference Manual

fwSetToDefault

Returns Fabric Watch thresholds and alarm levels to default values.
Synopsis fwsettodefault
Description Use this command to return Fabric Watch thresholds and alarm levels to defaults for all classes
and areas in Fabric Watch.
Fabric Watch uses two types of settings: factory default settings and user-defined custom settings.
•
•
The fwSetToDefault command reapplies the Fabric Watch default configuration for all classes and
areas. Use the advanced configuration option provided with the portThconfig, thConfig, and
sysMontitor commands to view and modify custom and default values for specified classes and
areas in Fabric Watch. For specific configuration procedures, refer to the Fabric Watch
Administrator's Guide.
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To return alarm levels to default values:
To view the current Fabric Watch configuration for the environment class:
Fabric OS Command Reference
53-1001764-01
Factory default settings are automatically enabled. These settings vary depending on
hardware platform and cannot be modified.
For some settings, you can create custom threshold configurations to suit your unique
environment.
switch:admin> fwsettodefault
Committing configuration...done.
switch:admin> sysmonitor --show env
Class: ENV
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
Default:
Low:
Custom:
TimeBase: None
Value : 90
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: None
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
TimeBase: None
Value :32
Trigger : Above Action: None
2
fwSetToDefault
381