Brocade Communications Systems Brocade 8/12c Command Reference Manual page 707

AL_PA Offset 13
Trunk Port
Long Distance
VC Link Init
Locked L_Port
Locked G_Port
Disabled E_Port
ISL R_RDY Mode
RSCN Suppressed
Persistent Disable
LOS TOV enable
NPIV capability
Fabric OS Command Reference
53-1001764-01
Displays (..) or OFF when the arbitrated loop physical address (AL_PA) on the
port is configured to use a 0x0 AL_PA address (default). Displays ON when
the address configuration is 0x13 AL_PA. This value is set by the portCfgAlpa
command.
Displays ON when port is set for trunking. Displays (..) or OFF when trunking is
disabled on the port. This value is set by the portCfgTrunkPort command.
Displays (..) or OFF when long distance mode is off; otherwise, displays long
distance levels as follows:
LE The link is up to 10 km.
LM The link is up to 25 km.
L1 The link is up to 50 km.
L2 The link is up to 100 km.
LD The distance is determined dynamically.
LS The distance is determined statically by user input.
This value is set by the portCfgLongDistance command.
Displays (..) or OFF when the long distance link initialization option is turned
off. Displays ON when it is turned on for long distance mode. This value is set
by the portCfgLongDistance command.
Displays ON when the port is locked to L_Port only. Displays (..) or OFF when
L_Port lock mode is disabled and the port behaves as a U_Port). This value is
set by the portCfgLport command.
Displays ON when the port is locked to G_Port only. Displays (..) or OFF when
G_Port lock mode is disabled and the port behaves as a U_Port. This value is
set by the portCfgGport command.
Displays ON when the port is not allowed to be an E_Port. Displays (..) or OFF
when the port is allowed to function as an E_Port. This value is set by the
portCfgEport command.
Displays ON when ISL R_RDY mode is enabled on the port. Displays (..) or OFF
when ISL R_RDY mode is disabled. This value is set by the portCfgISLMode
command.
Displays ON when RSCN suppression is enabled on the port. Displays (..) or
OFF when RSCN suppression is disabled. This value is set by the portCfg
rscnsupr command.
Displays ON when the port is persistently disabled; otherwise displays (..) or
OFF. This value is set by the portCfgPersistentDisable command.
Displays ON when LOS TOV is enabled on the port; otherwise displays (..) or
OFF. This value is set by the portCfgLossTov command.
Displays ON when N_Port ID Virtualization (NPIV) is enabled on the port
(default). Displays (..) or OFF when NPIV capability is disabled. This value is
set by the portCfgNPIVPort command.
2
portCfgShow
675