Brocade Communications Systems Brocade 8/12c Command Reference Manual page 710

2
portCfgShow
Displays supported only on the Brocade 7500/7500E/FR4-18i platforms
When executed on the Brocade 7800/FX8-24, the following commands are not blocked, but return
no relevant information.
mode
inbandmgmt
Examples To display the port configuration settings for a single port on a Brocade DCX-4S:
678
ve_port Displays information for the specified FCIP tunnel on the Brocade
7800/FX8-24 (only). To display the tunnel, specify the VE_Port number
associated with the tunnel configured on one of the GbE ports. VE_Ports
are numbered 16-23 on the Brocade 7800 and 12-31 on the Brocade
FX8-24 blade.
tunnel_id Displays information for the specified FCIP tunnel on the Brocade
7500/7500E/FR4-18i only. valid tunnel IDs are 0 to 7.
-ipsec On the 7500/7500E/FR4-18i, this option displays IKE and IPSec policy
information on IPSec-enabled tunnels. On the Brocade 7800/FX8-24,
this option displays whether IPSec is enabled or disabled. If enabled, the
key is displayed. This operand is optional.
-qosmap Displays the VC to QoS mapping. This operand is optional and valid only
on the 7500/7500E/FR4-18i.
Displays the mode of the specified GbE port as FCIP or not configured.
Displays any inband management interfaces configured on the Brocade
7500 for a specified GbE port. This command is not supported on the
FR4-18i blade.
switch:admin> portcfgshow 1/3
Area Number:
Speed Level:
Fill Word:
AL_PA Offset 13:
Trunk Port
Long Distance
VC Link Init
Locked L_Port
Locked G_Port
Disabled E_Port
Locked E_Port
ISL R_RDY Mode
RSCN Suppressed
Persistent Disable
LOS TOV enable
NPIV capability
QOS E_Port
Port Auto Disable:
Rate Limit
EX Port
Mirror Port
Credit Recovery
F_Port Buffers
NPIV Max Login Limit:
CSCTL mode:
3
AUTO(HW)
0(Idle-Idle)
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
AE
OFF
OFF
OFF
OFF
ON
OFF
126
OFF
Fabric OS Command Reference
53-1001764-01