Fcrbcastconfig - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

fcrBcastConfig

fcrBcastConfig
Displays or sets the broadcast frame forwarding option.
Synopsis fcrbcastconfig --show
fcrbcastconfig --enable -f fabric id
fcrbcastconfig --disable -f fabric id
fcrbcastconfig --help
Description Use this command to enable or disable the broadcast frame option or to display the current
configuration. If no operands are specified, this command displays the usage. By default, frame
forward option is disabled. Use the --show option to display the current settings on the switch.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command takes the following operands:
--show
--enable
--disable
--help
Examples To display the current configuration:
To enable broadcast frame forwarding for FID 33, 28, and 2:
To display the new configuration:
To disable broadcast frame forwarding for FID 33:
276
Shows the current broadcast configuration as enabled or disabled. If
broadcast frame forwarding is disabled for selected FIDs, only the enabled
FIDs in the current configuration are displayed.
Enables the frame forwarding option for a specified fabric ID.
Disables the frame forwarding option for a specified fabric ID
-f fabric id Specifies the fabric ID to be disabled or enabled. Valid values are 1-128. This
operand is required with the --enable and --disable options.
Displays the command usage.
fcr:admin> fcrbcastconfig --show
Broadcast configuration is disabled for all FID
fcr:admin> fcrbcastconfig --enable -f 33
fcr:admin> fcrbcastconfig --enable -f 28
fcr:admin> fcrbcastconfig --enable -f 2
fcr:admin> fcrbcastconfig --show
Broadcast configuration is enabled for FID:
2 33 128
fcr:admin> fcrbcastconfig --disable -f 33
Fabric OS Command Reference
53-1001764-01