Ficoncfg - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

ficonCfg

ficonCfg
Configures the specified FICON database.
Synopsis ficoncfg --set database port_index
ficoncfg --reset database
ficoncfg --help
Description Use this command to configure a FICON database on a specified port. Refer to ficonShow for a
description of the database content.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:.
port_index
--set
--reset
database
Examples To set the LIRR database on port 5:
To reset the LIRR
See Also ficonHelp, ficonShow
314
Specifies the port to be configured by its port index. Use switchShow for a
listing of valid port index numbers.
Sets the configuration entry.
Resets the configuration entry to its default value.
Specifies the name of the FICON database. The only database currently
supported is the follwoing:
LIRR Devices registered to receive link incident reports.
switch:user> ficoncfg --set LIRR 5
switch:user> ficoncfg --reset LIRR
Fabric OS Command Reference
53-1001764-01