Brocade Communications Systems Brocade 8/12c Command Reference Manual page 660

2
portCfg
Function Commands supported only on the Brocade 7500/7500E and the Brocade FR4-18i platforms
Synopsis portcfg action [slot/] ge_port arguments
Description Use this command to manage configuration parameters for ports and Gigabit Ethernet (GbE) ports
on the Brocade 7500 and 7500E FC switches and on the FR4-18i FC blade. The following
commands are exclusive to these platforms.
•
•
628
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 2
Flags: 0x00000000
FICON: Off
-------------------------------------------
Circuit ID: 16.0
Circuit Num: 0
Admin Status: Enabled
Oper Status: In Progress
Remote IP: 192.168.2.20
Local IP: 192.168.2.10
Metric: 0
Min Comm Rt: 100000
Max Comm Rt: 100000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 10000
Path MTU Disc: 0
VLAN ID: 300
L2CoS: F: 7 H:
DSCP: F: 32 H: 16 M:
Flags: 0x00000000
-------------------------------------------
Circuit ID: 16.1
Circuit Num: 1
Admin Status: Enabled
Oper Status: In Progress
Remote IP: 192.168.2.21
Local IP: 192.168.2.11
Metric: 0
Min Comm Rt: 100000
Max Comm Rt: 100000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 10000
Path MTU Disc: 0
VLAN ID: 200
L2CoS: F: 0 H:
DSCP: F: 0 H:
Flags: 0x00000000
switch:admin>
portcfg arp - Add and delete address resolution protocol (ARP) entries. Flush ARP table.
portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels.
-
Delete, reset, and modify QoS mappings on an existing tunnel.
-
Create or modify a tunnel with VLAN tagging and Class of Service (CoS).
-
Create or modify a tunnel with Tape read/write Pipelining enabled or disabled.
5 M: 3 L: 1
8 L: 4
0 M: 0 L: 0
0 M: 0 L: 0
Fabric OS Command Reference
53-1001764-01