Brocade Communications Systems Brocade 8/12c Command Reference Manual page 705

--help
Examples To enable QoS on a port.
To disable QoS on a port.
To set the ingress rate limit on a port to 2 Gbps:
To set the default QoS configuration on a port:
See Also portCfg, portCmd, portShow, switchShow, configure
:
Fabric OS Command Reference
53-1001764-01
configuration. For example if the rate limit is set at 4 Gbps and the port
comes online only at 2 Gbps, no enforcement is needed. Specify an ingress
rate in Mbps. Supported values for ratelimit are: 200, 400, 600, 800, 1000,
1500, 2000, 2500, 3000, 3500, 4000, 5000, 6000, 7000, and 8000.
Displays the command usage.
switch:admin> portcfgqos --enable 3/15
switch:admin> portcfgqos --disable 3/15
switch:admin> portcfgqos --setratelimit 3/15 2000
switch:admin> portcfgqos --default 3/15
2
PortCfgQoS
673