Brocade Communications Systems Brocade 8/12c Command Reference Manual page 838

2
portThConfig
--show
--help
Examples To set custom thresholds for the port class and CRC area with E-mail alerts:
To apply the new custom settings so they become effective:
To set custom thresholds for the VE_Port class and UTIL area with SNMP alerts and save the
thresholds nonpersistently:
To cancel the custom settings that have previously been saved nonpersistently:
806
Displays the threshold configuration or run-time status for all configured port
types and areas. You can optionally specify a port type to display the
threshold for ports of that type only. The display includes the port persistence
time value in seconds, which is set by the fwSet command. Specify an area to
display the area-specific configuration only. When issued without operands,
this command displays Fabric Watch thresholds for all classes and areas.
-current_status
Displays current values for a specified port type and area, as registered by
Fabric Watch, or for all port types and areas. The output includes PortType,
Area, Port number, Circuit ID (for the Brocade 7800 and FS8-24 only), Value,
and State. The State field reports whether the current value is above, in
range, or below (info) the configured threshold.
The following operands are optional with the --apply, --cancel, and
--show options; if omitted, the default thresholds are used.
-thresh_level def | cust
Configures or displays default or custom threshold configuration settings.
-action_level def | cust
Configures or displays default or custom configuration settings.
Displays the command usage.
switch:admin> portthconfig --set port -area crc -highthreshold -value 2 -trigger above -action email
switch:admin> portthconfig --set port -area crc -highthreshold -value 2 -trigger below -action email
switch:admin> portthconfig --set port -area crc -lowthreshold -value 1 -trigger above -action email
switch:admin> portthconfig --set port -area crc -lowthreshold -value 1 -trigger below -action email
switch:admin> portthconfig --apply port -area crc -action cust -thresh_level cust
switch:admin> portthconfig --set ve-port -area util -highthreshold -value 2 -trigger above \
-action snmp -nosave
switch:admin> portthconfig --set ve-port -area util -highthreshold -value 2 -trigger below \
-action snmp -nosave
switch:admin> portthconfig --set ve-port -area util -lowthreshold -value 1 -trigger above \
-action snmp -nosave
switch:admin> portthconfig --set ve-port -area util -lowthreshold -value 1 -trigger below \
-action snmp -nosave
switch:admin> portthconfig --cancel ve-port -area util -action_level cust -thresh_level cust
Fabric OS Command Reference
53-1001764-01