Brocade Communications Systems Brocade 8/12c Command Reference Manual page 464

2
ipfilter
To create an IPv4-type IP filter policy:
To add a rule to the created policy "ex2":
To display the IP filter policies, including the new policy:
To save the IP Filter policy "ex2" (the status of the policy changes from modified to defined after
the policy is saved):
See Also policy, distribute
432
Rule Source IP
1 fec0:60:69bc:60:260:69ff:fe80:d4a
switch:admin> ipfilter --create ex2 -type ipv4
switch:admin> ipfilter --addrule ex2 -sip 10.32.69.99 -dp 23 -proto tcp -act permit
switch:admin> ipfilter --show
Name: default_ipv4, Type: ipv4, State: active
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex2, Type: ipv4, State: defined (modified)
Rule Source IP
1 10.32.69.99
switch:admin> ipfilter --save ex2
switch:admin> ipfilter --show
Name: default_ipv4, Type: ipv4, State: active
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex2, Type: ipv4, State: defined
Rule Source IP
1 10.32.69.99
Protocol
tcp
Protocol Dest Port
tcp 22 permit
tcp 23 permit
tcp 897 permit
tcp 898 permit
tcp 111 permit
tcp 80 permit
tcp 443 permit
udp 161 permit
udp 111 permit
udp 123 permit
tcp 600 - 1023
udp 600 - 1023
Protocol Dest Port
tcp 23 permit
Protocol Dest Port
tcp 22 permit
tcp 23 permit
tcp 897 permit
tcp 898 permit
tcp 111 permit
tcp 80 permit
tcp 443 permit
udp 161 permit
udp 111 permit
udp 123 permit
tcp 600 - 1023
udp 600 - 1023
Protocol Dest Port
tcp 23 permit
Fabric OS Command Reference
Dest Port Action
23 permit
Action
permit
permit
Action
Action
permit
permit
Action
53-1001764-01