Secpolicyshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

secPolicyShow

secPolicyShow
Displays an existing security policy including the FCS policy.
Synopsis secpolicyshow ["policy_set"[", name"]]
Description Use this command to display the members of an existing policy in the Active or Defined security
policy set. The command can be issued from all FCS switches.
This command displays the policy database one page at a time. Use secPolicyDump to display the
policy database without page breaks.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
"policy_type"
"name"
Examples To display all security policies from active databases:
858
Specify which policy to display, in quotation marks. Valid values are "Active",
"Defined", or and asterisk (*) for both Active and Defined. This operand is
optional. If not specified, all databases are displayed.
Specify the name of the security policy you want to view, in quotation marks.
This operand is optional. Valid values for this operand are:
DCC_POLICY_nnn
FCS_POLICY
SCC_POLICY
The specified policy name must be capitalized.
The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed
by a string of user-defined characters. These characters do not have to be
capitalized like regular policy names, but they are case-sensitive.
switch:admin> secpolicyshow "active"
____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary WWN
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c
2 No 10:00:00:60:69:30:1e:62
____________________________________________________
DId swName
1 primaryfcs
4 switch
Fabric OS Command Reference
53-1001764-01