Iscsiswcfg - Brocade Communications Systems Brocade 8/12c Command Reference Manual

iscsiSwCfg

Displays or configures the iSCSI switch level configuration.
Synopsis iscsiswcfg
iscsiswcfg
iscsiswcfg
iscsiswcfg
iscsiswcfg
Description Use this command to display the iSCSI switch level configuration and to configure the iSCSI
connection redirection and target name prefix.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
enableconn
--
disableconn
--
showconn
--
modifygw
--
showgw
--
Examples To enable the connection redirection on slot 3:
To disable the connection redirection on slot 3:
To display the connection redirection for iSCSI blades on the switch:
To display a target name prefix:
To change a target name prefix:
See Also fosConfig, iscsiCfg, iscsiPortCfg
Fabric OS Command Reference
53-1001764-01
enableconn -s slot number | all
--
disableconn -s slot number | all
--
showconn -s slot number | all
--
modifygw -t target name
--
showgw
--
Enables the connection redirection on a specific slot or all slots.
Disables the connection redirection on a specific slot or all slots.
Displays the configuration of the connection redirection.
Specifies the IQN prefix of the target name.
Displays the target name prefix.
switch:admin> iscsiswcfg --enableconn -s 3
The operation completed successfully.
switch:admin> iscsiswcfg --disableconn -s 3
The operation completed successfully.
switch:admin> iscsiswcfg --showconn -s all
Number of records found: 1
Slot ICR Status
3 Disabled
switch:admin> iscsiswcfg --showgw
Target name is: iqn.2002-12.com.brocade
switch:admin> iscsiswcfg --modifygw -t iqn.2002-10.com.brocade
The operation completed successfully.
2
iscsiSwCfg
465