Diaghelp - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

diagHelp

diagHelp
Displays diagnostic command information.
Synopsis diaghelp
Description Use this command to display a short description of diagnostic commands.
Use default operands when running diagnostics commands. Non-default settings require detailed
knowledge of the underlying hardware and are intended for support personnel only. Contact
support if you want to use these operands.
Note The diagHelp command displays diagnostic commands that may not be available. Execute help
command to verify availability.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display diagnostic command information:
See Also none
206
switch:admin> diaghelp
bpportloopbacktest
bpturboramtest
ceeportloopbacktest
ceeturboramtest
(output truncated)
Functional test of port via blade processor path.
MBIST test for AP blade BP ASICs
Functional test of port N->N path.
MBIST test for ASICs
Fabric OS Command Reference
53-1001764-01