Brocade Communications Systems Brocade 8/12c Command Reference Manual page 696

2
portCfgNPIVPort
Use the portCfgShow command to determine whether NPIV is enabled on a port and to display the
maximum logins configured for that port. Use the portCfgDefault command to reset all port
configurations, including the NPIV configuration of a port.
Operands This command has the following operands:
slot
port
--enable
--disable
--setloginlimit login_limit
--help
mode
Examples To display the current NPIV port configuration:
switch:admin> portcfgshow
Ports of Slot 0
-------------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+
Speed
Fill Word
AL_PA Offset 13
Trunk Port
Long Distance
VC Link Init
Locked L_Port
Locked G_Port
Disabled E_Port
Locked E_Port
ISL R_RDY Mode
RSCN Suppressed
Persistent Disable.. .. ON ON
LOS TOV enable
NPIV capability
NPIV PP Limit
QOS E_Port
EX Port
Mirror Port
Rate Limit
Credit Recovery
Fport Buffers
Port Auto Disable .. .. .. ..
CSCTL mode
(output truncated)
664
For bladed systems only, specifies the slot number of the port to be
configured, followed by a slash (/).
Specifies the number of the port to be configured, relative to its slot for
bladed systems. Use switchShow for a listing of valid ports.
Enables NPIV on the specified port. This command can be executed only in
switch mode.
Disables NPIV on the specified port. This command can be executed only in
switch mode.
Sets the maximum number of allowed logins for the specified port. This
command can be executed both in switch mode and Access Gateway mode.
Valid values for login_limitrange from 0 to 255. The default value is 126.
Displays the command usage.
Enables or disables NPIV on the specified port. Specify 1 to enable or 0 to
disable the feature. The mode operand is a legacy command; it will be
deprecated in a future Fabric OS release.
0 1 2 3 4 5
AN AN AN AN AN AN AN AN
0 1 0 0 0 0
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. ..
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
80 80 80 80 80 80 80 80
.. .. AE AE AE AE AE AE
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
.. .. .. ON .. .. .. ..
.. .. .. ..
.. .. .. .. .. .. .. ..
6 7 8 9 10 11 12 13 14 15
AN AN AN AN AN AN AN AN
0 0 0 0 0 0 0
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
95 95 95 95 95 95 95 95
AE AE AE AE AE AE AE AE
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
.. .. ON .. .. .. .. ..
.. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. ..
Fabric OS Command Reference
0 0 0
53-1001764-01