Displaying And Maintaining Udp Helper; Udp Helper Configuration Example; Network Requirements; Configuration Procedure - HP 10500 Series Configuration Manual

Layer 3 - ip services
Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

Step
4.
Enter interface view.
5.
Specify a destination server.

Displaying and maintaining UDP helper

Task
Display information about packets
forwarded by UDP helper.
Clear UDP helper statistics.

UDP helper configuration example

Network requirements

As shown in
number 55 and destination IP address 255.255.255.255 or 10.1 10.255.255 to the destination server in
the public network with IP address 10.2.1.1/16.
Figure 43 Network diagram
Vlan-int1
10.110.1.1/16
Switch A

Configuration procedure

Make sure Switch A can reach the subnet 10.2.0.0/16 is available.
# Enable Switch A to receive directed broadcasts.
<SwitchA> system-view
[SwitchA] ip forward-broadcast
# Enable UDP helper.
[SwitchA] udp-helper enable
# Enable UDP helper to forward broadcast packets with the UDP destination port 55.
[SwitchA] udp-helper port 55
Command
Figure
43, configure UDP helper to forward broadcast packets with UDP destination port
Vlan-int1
10.2.1.1/16
IP network
interface interface-type
interface-number
udp-helper server [ vpn-instance
vpn-instance-name ] ip-address
Command
display udp-helper server [ interface
interface-type interface-number ] [ | { begin
| exclude | include } regular-expression ]
reset udp-helper packet
Server
Switch B
103
Remarks
N/A
No destination server is
specified by default.
Remarks
Available in any view.
Available in user view.

Advertisement

Table of Contents
loading

Table of Contents