HP ProCurve 6120G/XG Configuration Manual page 397

For example, show lldp config produces the following display when the switch
is in the default LLDP configuration:
Figure 13-16. Example of Viewing the General LLDP Configuration
Configuring for Network Management Applications
Displays the LLDP global configuration, LLDP port status, and
SNMP notification status. For information on port admin status,
refer to "Configuring Per-Port Transmit and Receive Modes" on
page 13-55.
Med Topology Trap Enabled
-------------------------
False
True
False
False
True
False
False
LLDP (Link-Layer Discovery Protocol)
Note: This value corresponds to
the lldp refresh-interval
command (page 13-51).
13-49