HP ProCurve 6120G/XG Configuration Manual page 206

Configuring IP Addressing
Configuring a Single Source IP Address
Figure 8-16. Example of Detailed Information Displayed for Each Protocol
The show command can also be used with the application to display the source
IP address selection information in effect for the application protocol.
8-26
ProCurve(config)# show ip source-interface detail
Source-IP Detailed Information
Protocol : Tacacs
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : Up
Protocol : Radius
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : Up
Protocol : Syslog
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : Up
Protocol : Telnet
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : Up
Protocol : Tftp
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : N/A
Protocol : Sntp
Admin Policy
Oper Policy
Source IP Interface
Source IP Address
Source Interface State : N/A
: Configured IP Interface
: Configured IP Interface
: vlan 22
: 10.10.10.4
: Configured IP Address
: Configured IP Address
: vlan 3
: 10.10.10.2
: Configured IP Interface
: Configured IP Interface
: vlan 10
: 10.10.10.10
: Configured IP Interface
: Configured IP Interface
: loopback 1
: 10.10.10.11
: Outgoing Interface
: Outgoing Interface
: N/A
: N/A
: Outgoing Interface
: Outgoing Interface
: N/A
: N/A