Fieldbus Configuration Object 91H; Class Attributes; Instance #1: Fdna-01 Configuration Parameters; Group A (Group 1) - ABB FDNA-01 User Manual

148 Communication protocol

Fieldbus configuration object 91h

The Fieldbus configuration object allows the user to configure the
fieldbus configuration groups without needing to know the drive-
specific groups associated with the configuration groups.
Note: When using the Fieldbus configuration object to update the
fieldbus configuration groups, changes to the fieldbus configuration
will only take effect when a reset service of the Identity Object is
requested, the module is powered up the next time or when a
'Fieldbus Adapter parameter refresh' is given.

Class attributes

# Attribute
name
1 Revision

Instance #1: FDNA-01 configuration parameters

group A (group 1)

The actual parameter group number depends on the drive type.
Group A (group 1) corresponds to:
•
parameter group 51 in ACS355, ACSM1, ACS850 and
ACQ810
•
parameter group 51 in ACS880 if the adapter is installed as
fieldbus adapter A or group 54 if the adapter is installed as
fieldbus adapter B.
# Attribute name
1 Configuration Group
A (Group 1) –
Parameter 1
2 Configuration Group
A (Group 1) –
Parameter 2
3 Configuration Group
A (Group 1) –
Parameter 3
Services Description
Get Revision of the configuration
object
Services Description
Get, Set
Get, Set
Get, Set
See 01 FBA TYPE.
See 02 MAC ID.
See 03 BAUD RATE.
Data
type
UINT8
Data
type
UINT16
UINT16
UINT16