Oce CPS900 User Manual page 83

in the print job. A transparent arrow
subset 1 is 2-sided whereas subset 2 is 1-sided. As soon as a difference appears in
the same setting, the arrow becomes transparent. The transparent arrow indicates
that this particular setting has more than 1 value.
Repeat the steps 5, 6 and 7 for all subsets.
8.
Note: You will notice that with every subset you create, an icon is added in the left
upper hand corner of the 'Original' and 'Print' section of the operator panel.
Enter the number of prints and press the Start key
9.
How to delete a subset
Press the Correction key
1.
'Delete last subset?'
Note: Press the Correction key
of prints in this subset were changed.
Press 'Yes' to delete the last subset.
2.
[32]
[32] Delete a subset
Note: Each time the operator presses the Correction key
deleted. This means that you can delete more than one subset. Remember the
following. When you have deleted the last subset and you press the Correction
key again, the job is deleted.
indicates that the setting is ambiguous, e.g.
on the operator panel. The screen displays the message
three times if the default settings and the number
Combining print jobs
.
, the last subset is
83