Oce CPS900 User Manual page 20

The paper manager concept
Example
The job queue contains five jobs. Four jobs need color copy paper (A4/Letter, 100
2
g/m / 28 lb. bond). The fifth job needs transparencies. All paper trays contain color
copy paper (A4/Letter, 100 g/m
What is the workflow?
The first four jobs are processed without problems. The fifth job in the job queue
displays an alarm bell because there are no transparencies loaded in the paper trays.
[6]
[6] Workflow
Step
1
2
3
Note: Paper trays 1 and 2 of the Océ CPS900
types of paper in the paper trays.
20 Chapter 1 Introduction
Action
Check the message in the job queue
Press the key (located above the upper left-hand corner of the screen)
for the 'Job queue' to read the warning message.
Use the arrow-up or arrow-down key to select the job.
Press the round selection key in the middle
The screen displays the message 'Job needs A4, Transparency'.
Press the selection key again to close the message.
Close the job queue
Load the media
Open the paper compartment door.
Load the transparencies in a tray.
You can put the transparencies in a tray (not in tray 4).
Leave the paper compartment door opened.
Set the 'Paper manager' settings on the operator panel
Press the key for the 'Paper manager' to open the 'Paper manager'.
Press the key for the used tray on the right-hand side of the operator
panel.
Press the 'Set needed type' key.
The system uses the paper type that is indicated in the warning
message
Close the 'Paper manager'.
Close the paper compartment door.
The job begins to print.
2
/ 28 lb. bond).
®
cannot automatically detect the
.