Dynamic And Classic Quality Modes - Oce CPS900 User Manual

Dynamic and Classic Quality Modes

Introduction
There are two quality modes: Dynamic and Classic.
You can change the mode on the controller; you can also change the default.
You can change the mode for each file in the driver.
In the Océ CPS900
modes:
Dynamic
Very Coarse (Classic mode)
Coarse (Classic mode)
Normal (Classic mode)
Fine (Classic mode)
Very Fine (Classic mode)
When to select Dynamic or Classic mode
Dynamic mode is the default setting and the most optimal printing mode with respect
to print quality.
The Dynamic color-mixing scheme enhances the print quality of the Océ CPS900
significantly in the graininess of lighter colors, especially the blues and neutral
colors, the halftone screen visibility and the sharpness of the printout.
There are still some reasons for which to print in the classic quality mode. These are:
For maximum consistency with the Océ CPS900
classic quality mode is available.
For maximum stability and uniformity of large plains of one color.
For minimal color cast in neutrals, because the color is printed with mainly black
toner.
®
printer driver, you can select one of the following quality
Dynamic and Classic Quality Modes
®
R1 and R2, where only the
®
53