Actions in the job queue
Actions in the job queue
Introduction
To print the jobs, the operator must send the jobs to the job queue. The Océ CPS900
has different features that help the operator to manage the jobs.
You can perform the following actions on the jobs in the job queue.
Select a job and inspect the settings of that job.
Approve a job.
Delete a job from the job queue.
Move a job to the top of the job queue.
Hold and release a job.
Stop after this.
Note: When there are more jobs than the job queue can display, a job bar is
displayed and part of the job queue is collapsed. The job bar shows the number of
jobs that do not fit in the screen. The operator can use the arrow-up key and the
arrow-down key to scroll through the jobs and display the collapsed jobs.
[36]
[36] The collapsed jobs in the queue
92
Chapter 4 The Job Queue
®