Getting Started; The Power Modes Of The Océ Cps900 - Oce CPS900 User Manual

The power modes of the Océ CPS900®

Getting Started

The power modes of the Océ CPS900
Introduction
The Océ CPS900
Machine-off mode
Off mode
Sleep mode
Low-power mode
Stand-by mode or run mode
KOM mode.
[16]
[16] Power modes of the Océ CPS900
Mode Power
switch
Machine-off 0
Off 1
Sleep 1
Low power 1
Stand-by or run 1
KOM 1
Note: If the Océ CPS900
is green. The screen of the operator panel displays the message 'System error (code:
....). Please call Service.' You cannot use the Océ CPS900
34 Chapter 1 Introduction
®
has six different power modes.
®
LED in the
ON/OFF
button
no color
amber
amber (blinks)
green
green
amber
®
has a permanent error, the LED in the ON/OFF button
®
The system...
... has no electrical power.
... has electrical power, but is logically off.
... consumes the minimum amount of
power and will need some time to warm up
before actual use is possible.
... is on. To save energy, the power
consumption is lowered (higher power
consumption than sleep mode) and the
printer will need some time to warm up
before actual use is possible.
... is on and ready for use (or the printer is
in use).
... operator panel is active, but the rest of the
system is off. An operator can safely
perform maintenance tasks with help from
the instructions on the operator panel.
®
.