About The Job Queue - Oce CPS900 User Manual

About the Job Queue

About the Job Queue
Introduction
The operator can manage job queues on the controller
on the controller' on page
the operator a number of functions to manage and / or edit the jobs in the job queue
on the printer.
When you are not in the job editor and the main screen is active, you can scroll
through the job queue if you use the Up and Down arrow keys
the screen. To view the settings of a job in the job queue, press the round selection
key . You can navigate through all the menus for the 'Original' and 'Print '. To
close this view again, press the selection key again.
To manage the jobs in the job queue you have to open the 'Job queue'. In the job
queue you can select a job with the Up and Down arrow keys
following actions
Approve a job.
Delete a job.
Move a job to the top of the job queue.
Hold or release the job.
The jobs in the job queue are processed automatically from the top to the bottom.
New jobs are added at the end of the job queue. If the job at the top has an error or a
contradiction, the Océ CPS900
A job is removed from the job queue when the last sheet is printed and delivered at
its destination.
Queued jobs
A job in the job queue displays the following information.
88 Chapter 4 The Job Queue
57) and on the Océ CPS900
(see 'Actions in the job queue' on page
®
stops.
(see 'About job management
®
. The Océ CPS900
at the left side of
and perform the
92).
®
offers