Table of Contents
Advertisement
About job management on the controller
Introduction
All the jobs are spooled to the controller. If you have an operator-controlled
workflow, job management on the controller is the most important step in the
workflow process.
The operator can hold or process the jobs, or release them to the printer. In addition,
the operator can perform a number of actions before the jobs are ready to be printed.
Manage the print workflow.
Check and / or edit the print job settings.
Manage the job queues and the priority status of the jobs in the queues.
Manage the print workflow
The operator can use special software to manage and edit the print jobs on the
controller. The table below describes some examples of actions the operator can do
on the controller or via remote access to the controller.
[24]
[24] Manage the print workflow
Nr
1
2
3
Action
Rasterize or re-rasterize the print jobs.
Join different print jobs into one document or make other combinations.
Reshuffle pages within a document. (Docbuilder)
Optimize color quality and color settings of the print job.
About job management on the controller
57
Advertisement
Table of Contents
