Oce CPS900 User Manual page 35

Machine off mode
The electrical power connection to the Océ CPS900
switch
Off mode
The Océ CPS900
color of the ON/OFF button
The initializing process begins. After some time, the operator panel displays the
basic settings and the Océ CPS900
Sleep mode
The Océ CPS900
some time. The settings of the ECO timer indicate the delay. The default value is 60
minutes. The key operator can change this value (see the configuration and
maintenance manual).
If the Océ CPS900
Océ CPS900
when the controller sends an automatic print job (only if the image processing unit
is still on).
Note: You can not put the Océ CPS900
Low power mode
The Océ CPS900
for some time. The settings of the ECO timer indicate the delay. The default value is
15 minutes. The key operator can change this value (see the configuration and
maintenance manual).
The Océ CPS900
panel, or when the controller sends an automatic print job (only if the image
processing unit is still on).
Note: You can not put the Océ CPS900
Stand-by mode
The Océ CPS900
.
®
has electrical power. This condition is indicated by the amber
®
turns into the sleep mode when the Océ CPS900
®
is in the sleep mode, the screen of the operator panel is off. The
®
switches back to Stand-by when you press the ON/OFF switch, or
®
turns into the low power mode when the Océ CPS900
®
switches back to stand-by when you press a key on the operator
®
is ready to accept and process the print jobs.
The power modes of the Océ CPS900®
. You must press this button to switch the system on.
®
is switched to stand-by mode.
®
into the sleep mode manually.
®
into the low power mode manually.
®
is interrupted by the power
®
is not used for
®
is not used
35