Oce CPS900 User Manual page 111

Note: When you change the paper in a tray, the color of the paper description
changes to light green.
Close the paper compartment door.
8.
Note: If a job stops because the job needs a paper type that is not loaded in the
paper trays, the operator can select 'Set needed type' in the 'Paper manager'. The
operator changes the paper in the paper tray that is used for the job. When the
operator closes the'Paper manager', the job continues.
concept' on page
How to load paper in tray 4
Press the key for the 'Paper manager' to open the 'Paper manager'.
1.
Open the paper compartment door. Tray 4 moves down.
2.
Put the paper on top of the stack (long edge feed). Leave the paper compartment door
3.
opened.
Note: The paper must be loaded face-down in tray 4.
Go back to the 'Paper manager'.
4.
Press the 'Tray 4' key.
5.
Define the settings for 'Type', 'Weight' and 'Medium', and close the 'Paper manager'.
6.
Note: When you change the paper in a tray, the color of the paper description
changes to light green.
Close the paper compartment door. Tray 4 moves up.
7.
17)
Loading Paper
(see 'The paper manager
111