Oce CPS900 User Manual page 11

Output tray linking
The printer output trays can be linked into one virtual tray. You can print larger jobs
(you don't have to empty output trays during the job).
The printer starts printing to the lower tray, and continues in the upper tray. The job
order will be respected within one job and over multiple jobs.
Printer on/off
You can program the machine to start-up each day at time X and shut down each day
at time Y. The printer on/off control will not interrupt running jobs.
Paper adjustments
The 'Paper adjustment' setting determines which image registration and image
enlargement values are used for the media type selected. In order to guarantee high
output quality, fine tune the Océ CPS900
media characteristics. Only use this setting if you are not satisfied with the output
quality.
Keep going/keep sequence
You can put the machine into two different modes for processing jobs in the job
queue.
'Keep sequence' or 'Keep going') The system will always print the jobs in the same
order as displayed in the job queue. If a job cannot start printing, the system will
stop. No jobs will be printed. In the second setting, the system will always try to keep
producing. If a job in the job queue cannot start printing, because the job is on hold
or has a start contradiction, other jobs in the job queue may overtake that job and be
sent to print.
Error handling
Error handling on the Océ CPS900
on the operator panel. The error screen indicates the problem area, gives instructions
on how to continue and uses photos and images to illustrate how to solve a problem.
®
to take into account a number of special
®
is based on transparent, step-by-step scenarios
General Printer Concepts
11