Oce CPS900 User Manual page 33

[15]
[15] CCD Functions
Behavior
Number of clicks
Next job
Remote
job-starting
Disable CCD
CCD scenarios
Job finished
A job has finished printing and all paper output is ready.
The job is removed from the queue. If there is another job in the queue, the next job
automatically starts (if there are still credits available).
Job cancelled due to insufficient credits
The operator stops a job, after the warning "Refill credits.".
All other jobs in the queue will stay in the queue and the next job will start
automatically. The new job will pause immediately because of insufficient credits.
About the Copy Control Device (optional)
Description
By default, one credit is charged for an A4 / Letter 8.5x11
1-sided sheet and two for an A3 / Tabloid 11x17 1-sided
sheet.
2-Sided sheets are twice as expensive as 1-sided sheets.
Color prints are the same price as 1-sided black and white
sheets.
However, the key operator can change this with three KOS
settings:
The number of credits charged for an A3 / Tabloid 11x17
1-sided sheet can be set to one or two.
The number of clicks charged for a 2-sided sheet can be
set equal to the number of credits for a 1-sided sheet.
The number of clicks charged for a color print can be set
to 1, 2, 3 or 4.
To change the number of clicks, see 'About the KOS Editor'
in the 'Configuration and Maintenance Manual'.
Note that if a next operator submits a new job before the last
job (current operator) is finished, the new job will be charged
from the card of the current operator.
It is the responsibility of the key operator to disable automatic
print jobs. If automatic print jobs are not disabled, the current
operator will be charged for a job started by a remote user.
The key operator can disable the CCD in the KOS editor
(password-protected). If the CCD is broken, the Océ
®
CPS900 can still be used.
33