Oce CPS900 User Manual page 43

[19]
[19] Settings For the System Menu
'System' menu
'KOS editor'
(Key operator system)
'KOS adjustments'
'KOM'
(Key Operator
Maintenance)
'Change KOS PIN
code'
'Change KOM PIN
code'
Press the 'Close' key to leave the 'System manager'.
3.
Note: You cannot access the 'System manager' if the job editor, the paper manager
or the job queue is open.
Adjust the System manager settings
Description
This menu and its settings are protected by a PIN code.
The settings give access to a number of global system
settings. Only the key operator manages these settings
(see 'Configuration and Maintenance Manual').
This menu and its settings are protected by a PIN code.
Only the key operator manages these settings (see
'Accessing the KOS Adjustments' in the Configuration
and Maintenance Manual).
This menu allows the key operator to start preventive
maintenance actions (see 'Configuration and
Maintenance Manual').
When you enter the current KOS PIN code, a dialog
appears to enter the new PIN code. The new PIN code is
readable in clear text in this dialog. If all digits are
entered, 'Confirm' is enabled. Press 'Cancel' at any time
to abort the PIN code change.
When you enter the current KOM PIN code, a dialog
appears to enter the new PIN code. The new PIN code is
readable in clear text in this dialog. If all digits are
entered, 'Confirm' is enabled. Press 'Cancel' at any time
to abort the PIN code change.
43