About The Job Capacity Of The Océ Cps900 - Oce CPS900 User Manual

About the job capacity of the Océ CPS900
Introduction
Job capacity
The Océ CPS900
displays an error message when there are more jobs than the Océ CPS900
handle. The table below specifies the maximum job capacity that the Océ CPS900
can handle.
Job capacity for jobs on the Océ CPS900
[22]
[22] Job capacity for jobs on the Océ CPS900
Location
Job queue
Jobs processed on the Océ CPS900
If the operator creates more than 25 jobs in the job queue, an error message appears.
This message indicates that the maximum job capacity on the Océ CPS900
reached. The Océ CPS900
first delete a job from the job queue. After the job is deleted, the operator can create
a new job on the Océ CPS900
the operator can also create space by solving contradictions or simply waiting for
other jobs to finish.
Note: The operator creates subsets with the Set-build key
on the Océ CPS900
operator creates more than 90 subsets, an error message appears. The message
indicates the maximum subset capacity. The Océ CPS900
90 sets at a time.
Job capacity for jobs from the controller
Job types
The operator can create jobs on the controller as well. These jobs are stored on the
controller. The controller sends the jobs to the Océ CPS900
the controller sends the jobs determines the job type.
An automatic print job (AP job) is sent directly to the job queue.
An interactive print job (IP job) is sent to the mailbox (depending on the 'Workflow'
setting). The job needs operator interaction to be printed on the Océ CPS900
®
can process a limited number of jobs at a time. The operator panel
Maximum number of jobs the system can
process
25
®
®
cannot process more jobs at the time. The operator must
®
. Instead of deleting a job to create space for new jobs,
®
. The system can process 90 subsets in total (job queue). If the
About the job capacity of the Océ CPS900®
®
®
®
®
cannot process more than
®
can
®
is
. The subsets are stored
®
. The manner in which
®
.
®
55