How To Handle Contradictions On The Océ Cps900 - Oce CPS900 User Manual

How to Handle Contradictions on the Océ CPS900®
How to Handle Contradictions on the Océ CPS900
Introduction
The Océ CPS900
supplies are not available. There are three types of contradictions.
Specification contradictions
Specification contradictions refer to a combination of settings that are not
possible. For example: you want to print transparencies 2-sided. This is a
specification contradiction. You can only print transparencies 1-sided.
Specification contradictions occur before a job is sent to the queue or mailbox.
The screen shows a message.
Start contradictions
Start contradictions refer to a combination of settings that are not possible at this
moment because the supplies are not present. For example: a job needs
transparencies, but the paper trays do not contain transparencies. Start
contradictions occur after a job is sent to the queue or mailbox. The job bar
displays a warning (
Run-time contradictions
Run-time contradictions refer to the fact that a job stops because a supply has run
out (e.g. toner, fuser oil). The job bar displays an error (
the screen also shows a message.
Illustration
[44]
[44] Example of a Start Contradiction on the Océ CPS900
116 Chapter 7 Problem Solving
®
does not print a job if the settings do not match or the required
). If the job is opened, the screen also shows a message.
®
). If the job is opened,
®