Color Management Settings And Job Submission - Oce ColorWave 600 User Manual

Color management settings and job submission

Color management settings and job submission
The way in which you submit a print job to the printer defines in most cases the file
type of the document. If you use a printer driver, the original file type will be changed
by the driver into a standard file type. The printer checks the file type of the
document and based on the file type the printer applies the default color management
settings of the Océ Express WebTools.
If you use FTP or LPR to send a job to the printer, the file type is not changed. The
file is sent to the printer the way in which it was saved in the application you used to
create or edit the file. If there is no embedded color profile present in the document,
the printer checks the file type of the document and based on the file type the printer
applies the default color management settings of the Océ Express WebTools.
If you want to use the embedded color profile for your print job (for example,
®
embedded profile created with Adobe Illustrator) you can choose between 2
options. You can use the WPD driver where you can indicate to follow the color
settings managed by the application. You can also send the job via FTP or LPR. If
the controller can recognize the embedded color profile, it will be applied. If the
embedded color profile cannot be recognized, the controller applies the default color
settings managed by the Océ Express WebTools.
The table below gives an overview of the relation between the job submission
method, the file type and the color management settings
243