Permissions - Emerson Dixell X-web300 Operation Manual

3.9 PERMISSIONS

From the "Configuration" menu you can access "Users". This section is one of the most important to preserve
the correct functioning of the unit. You can setup others users account and grant them the permission to
interact with the XWEB. Permissions are a powerful tool to avoid accidental system damage and security
holes.
We strongly suggest you to create a user with read only privileges and another one with the ability to change
system behaviour. The third user must be the administrator who should be the only one to be able to interact
with critical system behaviour, such as alarm setup menu or devices add/delete etc.
To modify an existing user you just have to put the correct name and password (by clicking inside the box),
then push on "Modify" button. Default configuration consists of one Administrator.
To allow a user to interact with the unit, please assign him correct rights. To do this check/uncheck the
proper permission. At the end of the procedure you have to confirm the changes by clicking on "apply"
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 98/114