Emerson Dixell X-web300 Operation Manual page 53

All the working days (Enabled) will follow the new times.
Repeat the same operation to define the new period for the Partly Enabled days but clicking on " Set for
All Partly Enabled "
DAY ATTRIBUTE

To verify the day attribute point the mouse arrow into the appropriate day and click the right button.
 Single day setting
The attribute of a single day can be defined as follow:
Point the mouse arrow into the appropriate day;
Click on the left mouse button and select from the list the new attribute:
Set As Enabled  Only that day as Enabled.
Set As Not Enabled  Only that day as Not Enabled.
Set As Yearly Not Enabled  That day as Not Enabled for all the years.
Set As Partly Enabled  Only that day as Partly Enabled.
Set As Yearly Partly Enabled  That day as Partly Enabled for all the years.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 53/114